News - HP LaserJet 1100 Companion Parts

year

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP LaserJet 1100 Companion Parts

sourcehttp://www.printerparts-hp.com

publisherJacky

time2012/08/24

Click Part Number to view item detail and ordering information.

Part	Description
J3264-61001	Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3265-61001	Module - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J3263-61001	Print_Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network
J3263-69001	Print_Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network
C4137A	Memory - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module
C4221A	Scanner_Assembly - Optional copier/scanner assembly - Adds one button scan/copy to LaserJet 1100 - Attaches to front of printer
C4221A	Scanner_Assembly - Optional copier/scanner assembly - Adds one button scan/copy to LaserJet 1100 - Attaches to front of printer
RG9-1512-000CN	Scanner_Assembly - Document scanner assembly
RG5-4605-000CN	PC_Board - ECU PCB - Engine contoller unit PC board - 110V
RG5-4561-000CN	Sensor - Contact image sensor assembly
RG5-4606-000CN	PC_Board - ECU PCB - Engine contoller unit PC board - 220V
RG5-4605-080CN	PC_Board - ECU PCB - Engine contoller unit PC board - 110V
C4146-60001	PC_Board - Formatter PC board
H3965-60002	Maintenance_Kit - Maintenance kit (220V) - Includes fuser, separation pad and sub pad, transfer roller, pressure roller, pickup roller, face down roller - Procedure requires service manual
RG5-4606-080CN	PC_Board - ECU PCB - Engine contoller unit PC board - 220V
RG5-4570-000CN	Laser_Scanner - Laser/scanner assembly
H3965-60001	Maintenance_Kit - Maintenance kit (120V) - Includes fuser, separation pad and sub pad, transfer roller, pressure roller, pickup roller, face down roller - Procedure requires service manual
C4136A	Memory - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module
RG5-4589-040CN	Fuser_Assembly - Heating element assembly (For 100V to 127V operation) - Bonds the toner to the paper with heat
J3265-69001	Print_Server - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
C2947A	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
RG5-4590-040CN	Fuser_Assembly - Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
J3263-69011	Print_Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network
C4135A	Memory - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module
C4092A	Cartridge - Ultra-Precise Black toner (EP) cartridge
RG5-4604-000CN	Door - Printer door - Front printer access door
RG5-4581-000CN	Feeder - Feeder roller assembly - Includes flags and sensors
J3264-69001	Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
C2946A	Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
5188-5673	Power_Supply - Power module (wall mount, MEI-AH ED12007) - Input voltage 230VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Europe and Israel)
RB2-3992-000CN	Plate - Formatter plate
9100-5176	Power_Module - POWER SUPPLY, 13V/300MA JPN
RF5-2823-000CN	Roller - Pressure roller - Provides pressure for media as it passes through the fuser roller
RB2-3912-000CN	Roller - Feeder roller
RG9-1332-000CN	Support - Input paper support - Printer input media support
RG9-1433-000CN	Holder - Connector holder assembly - Supports optional scanner assembly and connecting cable
5063-1254	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector
0957-2197	Power_Module - Wall mount power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A - United States and Canada
RF5-2828-000CN	Cover - Back side chassis cover
RH7-1404-000CN	Motor - Gear drive assembly motor
5063-1255	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
8121-1037	Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long
8120-8668	Cable - IEEE 1284 Bi-Tronics parallel interface cable - DB-25 (M) connector (type A) to IEEE 1284C 36-pin (M) connector (type C) - 2.0m (6.6ft) long Miniconnector
RF5-2827-000CN	Cover - Printer door frame and scanner output cover
RH7-1669-000CN	Motor - Gear drive assembly motor
8120-6814	Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)
RH2-5379-000CN	Cable - Flex cable - A 30-pin (F) connector on a circuit board to a 30-pin (M) edge connector - 37.5cm (14.8in) long
RG5-4586-000CN	Drive_Assembly - Gear drive assembly - Includes drive motor
RG5-4657-000CN	Roller - Transfer roller assembly - Includes drive gear
RG5-4593-000CN	Delivery - Delivery assembly - Paper output assembly - Has yellow 'avoid contact' label in several languages on top
0957-2229	Power_Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)
0950-3354	Power_Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)
0950-3349	Power_Module - Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for use in Europe and Israel)
RY7-5050-000CN	Separator - Subpad kit - Helps separation of media at pickup roller
5188-5676	Power_Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan)
0957-2228	Power_Supply - Power module (wall mount) - Input voltage 120VAC, 60Hz - Output voltage 12VDC, 1.25A, 15 watts (USA and Canada)
5188-6700	Power_Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord
RG5-4587-000CN	Rail - Printer door support rail - Left side
RG5-4588-000CN	Rail - Printer door support rail - Right side
RF5-2886-020CN	Pad - Separation Pad - Separation Pad and Holder Arm
RG5-4601-000CN	Tray - Single sheet input tray
RG5-4602-000CN	Tray - Input paper bin - Paper input for printer
0950-3351	Power_Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
0950-3352	Power_Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
RB2-3999-000CN	Cover - Laser/scanner cover
8120-6815	Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)
RB2-3932-000CN	Plate - Scanner plate - Provides laser/scanner mount
RB2-3939-000CN	Bushing - Transfer roller bushing - Right side
RB2-3941-000CN	Plate - Arm plate - Supports printer door guide arm - Left side
RB2-3942-000CN	Plate - Arm plate - Supports printer door guide arm - Right side
RB2-3943-000CN	Shaft - Paper pickup roller drive shaft - Mates to the shaft that pickup roller is attached to
RB2-3945-000CN	Foot - Rubber foot - Non-slip replacement rubber foot (four used)
RB2-3947-000CN	Retainer - Separation pad holder retainer - White plastic clip
RB2-3949-000CN	Cam - Pickup roller shaft cam - Provides mechanical engagement of pickup roller against separation pad
RB2-3950-000CN	Guide - Transfer guide
RS5-2502-000CN	Spring - Compression spring - Provides tension for separation pad
RG5-4608-000CN	PC_Board - Printer status display PC board
RG5-4616-000CN	Cable - Cable assembly - 12-pin (F) connector, 8-pin (F) connector, and 4-pin (F) connector - 62.9cm (24.8in) long
RG5-4617-000CN	Cable - Sensor cable - Connects J211, J003 and J004
RG5-4618-000CN	Cable - Motor cable - J007 to J401
RG5-4619-000CN	Cable - Thermistor cable - J008 to J206
RG5-4620-000CN	Cable - Display cable - Connects J1 to J901 on status display
RG5-4599-000CN	Switch - Door switch/sensor assembly
VS1-5057-002CN	Connector - Fuser electrical connector
RG5-4592-000CN	Mount - Roller mount - Provides fusing element with correct tension and holds it secure on mounting points
RF5-2819-000CN	Guide - Cartridge guide - Right side toner cartridge guide
RF5-2822-000CN	Roller - Output roller - Face-up output roller
RG5-4582-000CN	Plate - Paper guide plate assembly - Pushes paper to pickup roller
RG5-4584-000CN	Holder - Roller holder - Pickup roller support assembly
RG5-4585-000CN	Clutch - Paper pickup shaft drive clutch/gear assembly
0950-3350	Power_Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong)
RB2-4219-000CN	Plate - Grounding plate - Transfer roller ground path
RY7-5051-000CN	Clutch - Clutch kit - Connects to gear drive assembly
RB2-3930-000CN	Shaft - Pickup roller shaft
RB2-3931-000CN	Roller - Idler roller - Supports pickup roller shaft in holder
RB2-4001-000CN	Holder - PCB support - Printer status display PC board holder
RB2-4006-000CN	Guide - Paper output deflector
RB2-4014-000CN	Door - Memory door - Covers optional DIMM memory slot
RB2-4016-000CN	Stop - Slide stop - Holds end of output roller in place
RB2-4017-000CN	Holder - Cable holder - Flat cable holder
RB2-4018-000CN	Support - Left side chassis pod
RB2-4019-000CN	Support - Right side chassis pod
RG5-4591-000CN	Mount - Pressure roller mount - Left side
RB2-4030-000CN	Cover - Holder cover - Flat cable holder cover
RB2-4034-000CN	Mount - Printer door rail arm mount
RB2-4049-000CN	Plate - Ground connection - ECU plate to formatter plate
RB2-3940-000CN	Spring - Compression spring - Rrovides tension for transfer roller
RB2-3944-000CN	Spring - Leaf spring - Contact for toner cartridge
RB2-3951-000CN	Brush - Static charge eliminator brush
RB2-3952-000CN	Spring - Tension spring - Provides tension for toner cartridge high voltage contact - Rear contact
RB2-3953-000CN	Spring - Tension spring - Provides tension for toner cartridge high voltage contact - Front contact
RB2-3959-000CN	Spring - Leaf spring - Left side transfer roller grounding spring
RB2-3961-000CN	Spring - Torsion spring - Provides tension for output sensor flag
RB2-3985-000CN	Insulator - Insulating sheet - Between ECU PC board and metal pan
RB2-3956-000CN	Bushing - Pressure roller bushing - Left side
RB2-3957-000CN	Bushing - Pressure roller bushing - Right side
RB2-3958-000CN	Guide - Fixing guide - Stabilizes media under pressure roller
RB2-3960-000CN	Flag - Paper output sensor flag
RF5-2818-000CN	Guide - Cartridge guide - Left side toner cartridge guide
RB2-3984-000CN	Plate - ECU plate (L-shaped) - Metal plate that supports engine controller PC board
RB2-3986-000CN	Holder - Power switch lever holder
RB2-3987-000CN	Lever - Power switch lever
RB2-3988-000CN	Rod - Power switch lever connector rod
RH2-5381-000CN	Cable - Flex cable - Has two 20-pin (M) edge connectors - 8.2cm (3.2in) long
RB1-7303-000CN	Spacer - Stand-off spacer between ECU PC board and metal ECU pan
RS6-2122-000CN	Spring - Compression spring - Provides tension for paper kick plate
RY7-5060-000CN	Spring - Compression spring - Provides tension between fuser and pressuer roller - Includes screw fastener
RG9-1329-000CN	Support - Paper support - Scanner input support and printer face-up output support
RF5-2830-000CN	Roller - Output roller - Face-down output roller
RF5-2886-000CN	Pad - Separation pad - Separation pad and holder arm
RY7-5049-000CN	Gear - Gear kit - Driven by gear/motor assembly - Drives fuser, pressure, transfer and output rollers
RH7-5227-000CN	Solenoid - Solenoid - Engages pickup roller
0957-2110	Power_Module - Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA and Canada)
8120-6809	Power_Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
8120-6813	Power_Cord - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
0957-2134	Power_Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
RB2-4026-000CN	Roller - Paper pickup roller
8120-6812	Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
C6072-60301	Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
8120-6811	Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
J3263-40003	Bracket - Mounting bracket (plastic clip) - Holds the JetDirect print server module on the rear panel of the printer
VS1-7177-002CN	Connector - Fuser electrical connector
CK-8006-000CN	Lubricant - Grease
8120-6800	Power_Cord - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
C4224-90962	Manual - LaserJet 1100 service manual - Printed version (English)
C4221A-Manual	Service_Guide_PH - HP LaserJet 1100 Companion Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
BZ99-R72-8010CN	Tool - Pod removal tool - Used to remove stabilizer pods - Includes both removal tools for right and left sides
J3263-61011	Print_Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network
WT2-5041-000CN	Tie-Wrap - Cable tie wrap
0957-2194	Power_Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
5184-5207	Cartridge - Ultra-Precise Black toner (EP) cartridge