News - HP Color LaserJet CP6015dn Parts

15

year

SLon Technology Co.,Limited

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP Color LaserJet CP6015dn Parts

sourcewww.printerparts-hp.com

publisherJacky

time2012/08/31

Click Part Number to view item detail and ordering information.
Part
Description
Q7539-69001
PC_Board  - Formatter (Main logic) board - For HP Color Laserjet CP6015 series
Q7539-69003
PC_Board  - Formatter (main logic) board - For HP Color Laserjet CP6015 series
Q7539-69002
PC_Board  - Formatter (Main logic) board - For HP Color Laserjet CP6015 series
Q3931-67935
Fixing_Assembly  - 110-127V FIXING ASS Y Kit Part Number
Q3931-67935
Fixing_Assembly  - 110-127V FIXING ASS Y Kit Part Number
Q3931-67914
Fuser_Assembly  - Fuser Assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat.
Q3931-67915
Fuser_Assembly  - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat
Q3931-67927
Fuser_Assembly  - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
Q3931-67904
Memory  - 512MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-3307-040CN
Belt  - Intermediate transfer belt (ITB) assembly
RM2-0190-000CN
Power_Supply  - LOW VOLTAGE POWER SUPPLY ASS Y
RM1-3594-000CN
Power_Supply  - Low voltage power supply assembly
RM1-4139-000CN
PC_Board  - Main controller PCA assembly - For the stapler/stacker and booklet maker unit
RM1-4178-000CN
Saddle  - Saddle stapler assembly
Q3931-67902
Memory  - 128MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4101-000CN
Tray  - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1)
Q3931-67907
Scanner_Assembly  - Laser/scanner assembly kit
RM1-4102-000CN
Tray  - Upper stack tray assembly (output bin 1) - For the booklet maker unit
CB380-67901
Drum  - HP CLJ Blk Print Cartridge
CB386-67901
Drum  - HP COLOR LASERJET YELLOW IMAGE DRUM
CB387-67901
Drum  - HP COLOR LASERJET MAGENTA IMAGE DRUM
4G3-0670-000CN
Mount  - MOTOR MOUNT ASSEMBLY
CB385-67901
Drum  - HP COLOR LASERJET CYAN IMAGE DRUM
Q3938-67965
Transfer_Kit  - Image Transfer Kit 150K
RM1-3307-000CN
Belt  - Intermediate transfer belt (ITB) assembly
CB381-67901
Cartridge  - Cyan print toner cartridge - For the Color LaserJet CP6015 series
CB382-67901
Cartridge  - Yellow print toner cartridge - For the Color LaserJet CP6015 series
CB383-67901
Cartridge  - Magenta print toner cartridge - For the Color LaserJet CP6015 series
RM1-3581-050CN
PC_Board  - DC Controller PCB
RM1-3581-000CN
PC_Board  - DC CONTROLLER PCB ASSY
Q3931-67937
PC_Board  - KIT-DC CONT. W/SERVICE DOC 1.61
Q3931-67928
PC_Board  - DC controller PC board assembly KIT-DC CONT. W/SERVICE DOC 1.61
Q3931-67911
Drive_Assembly  - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
CB387A
Drum  - HP COLOR LASERJET MAGENTA IMAGE DRUM 824A
CB385A
Drum  - HP COLOR LASERJET CYAN IMAGE DRUM 824A
CB386A
Drum  - HP COLOR LASERJET YELLOW IMAGE DRUM 824A
RM1-4105-000CN
Tray  - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series
FM2-0721-000CN
Stacker_Assembly  - Staple assembly - For stapler/stacker and booklet-maker unit
Q3931-67930
PC_Board  - DC controller PC board assembly
RM1-4140-000CN
PC_Board  - Saddle controller PCA assembly
FL2-0846-000CN
Stacker_Assembly  - Stapler unit - Located on the saddle stapler assembly
Q3931-67912
Drive_Assembly  - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the cyan and black cartridges
FM2-0722-000CN
Stapler  - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount
RM1-4109-000CN
Feeder  - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker
RM1-3652-000CN
Reversing_Unit  - Reversing assembly for duplexer assembly
Q3931-67913
Drive_Assembly  - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
CB380A
Drum  - HP COLOR LASERJET BLACK PRINT CARTRIDGE 823A
RM1-4136-000CN
Feeder  - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker
Q3931-67909
Transfer_Assembly  - Secondary transfer assembly - Located at bottom of the intermediante transfer betl (ITB) assembly
RM1-3686-000CN
Guide  - Intermediate lowerr feed guide assembly
CB384-67901
Cartridge  - Black print toner cartridge - For the Color LaserJet CP6015 series
RM1-3333-000CN
Door  - Right door sub assembly
RM1-4125-000CN
Tray  - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242)
RM1-3293-000CN
Delivery  - Face down paper delivery assembly
RM1-3665-000CN
Feeder  - Duplexing feed assembly
Q3931-67918
Tray  - 500-sheet paper input tray cassette - For use with tray 2
Q3931-67919
Roller  - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5
Q3931-67938
Roller  - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3356-000CN
Door  - Printer front door assembly
RM1-3218-000CN
Power_Supply  - Fuser power supply assembly
RM1-5475-000CN
PC_Board  - High voltage transfer |B| PCA assembly
RM1-3582-000CN
PC_Board  - High voltage transfer |A| PCA assembly
RM1-4119-000CN
Cover  - Middle height cover assembly for the booklet maker unit
4G3-0671-000CN
Plate  - Inner side plate assembly - Used on the booklet market series only
RM1-3206-000CN
Pickup_Assembly  - Paper cassette pick-up assembly - Includes 1 pick roller and 2 feed rollers
Q3931-67917
PC_Board  - Cartridge interface assembly kit
RM1-3345-000CN
Pickup_Assembly  - Multi-purpose/tray 1 paper pick-up assembly
Q3931-67903
Memory  - 256MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4516-000CN
Control_Panel  - Control panel assembly - Control buttons and display located on top front of printer
FM2-0730-000CN
Pressure_Assembly  - Pressure roller assembly - For the stapler/stacker and booklet-maker
RM1-4108-000CN
Guide  - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm
RM1-3585-000CN
PC_Board  - Memory tag PCA assembly
RC2-1278-000CN
Cover  - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit
RM1-3222-020CN
Lifter  - Lifter-drive-assembly
Q3931-67921
Tray  - Duplex switchback tray
RM1-4172-000CN
Guide  - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit
4G3-0769-000CN
Motor  - Ejection stack motor (M32) assembly
RM1-4130-000CN
Delivery  - Saddle paper delivery assembly
FM2-0756-000CN
Guide  - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker
RM1-4135-000CN
Guide  - Lower height guide assembly
FM2-1409-000CN
Motor  - Press motor (M36) assembly
4G1-2283-000CN
Cable  - CABLE, SADDLE UNIT
RC1-9313-000CN
Filter  - Air filter - Located on the upper right side of the printer behind the upper right cover
RM1-4104-000CN
Tray  - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray
RM1-3232-000CN
Case  - Thermopile case assembly
RL1-1477-000CN
Cover  - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only
4A3-1783-000CN
Roller  - ROLLER, FOLDING
RM1-3366-010CN
Drive_Assembly  - Drive assembly - For use with multi-purpose/tray 1
RM1-3258-000CN
Sensor  - Color plane registration sensor assembly
RM1-3341-000CN
Tray  - Multi-purpose/tray 1 drop down door paper input tray assembly
RM1-4121-000CN
Door  - Upper cover assembly - Top door located on the stapler/stacker assembly
RM1-4519-000CN
Motor  - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller
Q3938-67959
Roller  - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3253-000CN
Cage  - Formatter board cage assembly - Metal shield and enclosure for the formatter board
FM2-0737-000CN
Motor  - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount
RL1-1210-000CN
Cover  - Rear cover - Plastic cover that protects the rear part of the printer
FG3-2887-000CN
PC_Board  - Tray driver PCA assembly
RC2-1351-000CN
Cover  - Lower internal cover (stapler/stacker only)
RM1-4123-000CN
Cover  - Inner cover assembly - Inner cover located on the left side of the finisher main body
Q3931-67905
Cover  - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
RM1-4131-000CN
Guide  - Upper delivery guide assembly - For the saddle assembly
RC1-9336-000CN
Cover  - Left cover assembly - Plastic cover that protects the left side of the printer
RM1-3286-000CN
Motor  - Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum
FG3-2892-000CN
Cable  - CABLE, SOLENOID
RM1-4110-000CN
Guide  - Lower entrance guide assembly - Located on the saddle paper feeder assembly
RM1-3247-000CN
Gear  - Fuser one way gear assembly
RM1-3247-020CN
Gear  - Fuser one way gear assembly
RM1-3247-020CN
Gear  - Fuser one way gear assembly
RM1-4129-000CN
Cover  - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker
RC1-9339-000CN
Cover  - Right upper cover - Located on top of the right door assembly
4G3-0725-000CN
Guide  - Motor guide assembly - Located on the saddle assembly - For motor (M3)
Q3931-67920
Roller  - Paper pick-up retard roller - Used for tray 1
RM1-3238-000CN
Plate  - Cyan partition plate assembly
RM1-3235-000CN
Plate  - Yellow partition plate assembly
RM1-3280-000CN
Drive_Assembly  - Intermediate transfer belt (ITB) estrangement drive assembly
RM1-3233-000CN
Cover  - Left side wall cover assembly
4H3-0370-000CN
Clutch  - Electromagnetic shutter clutch (CL31) connector (J1046)
RM1-3354-000CN
Plate  - Rear mount cover plate assembly
RK2-1366-000CN
Motor  - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly
RM1-3291-000CN
Guide  - Multi-purpose/tray 1 guide assembly
RM1-3237-000CN
Plate  - Magenta partition plate assembly
RM1-3612-000CN
Cable  - FIXING JOINT CABLE
4G3-0934-000CN
Sensor  - Paper face sensor assembly
RU5-6035-000CN
Guide  - Tray roller guide - Located on the output bin 1
RM1-0037-020CN
Roller  - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
Q7829-67925
Roller  - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue)
RC2-1283-000CN
Panel  - Upper height panel - Located on the stapler/stacker unit
RL1-1280-000CN
Cover  - Right lower cover assembly
RM1-4107-000CN
Sensor  - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body
RM1-3364-000CN
Fan  - Exhaust fan assembly - Cools the fuser area
RM1-3618-000CN
Other_Parts  - REAR LOWER CABLE
4G3-1777-000CN
Cable  - Staple connecting cable assembly
4K1-1103-000CN
Motor  - Stepping motor (M5) connector (J113)
FL2-0821-000CN
Solenoid  - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
FM2-0763-000CN
Sensor  - Rear end sensor assembly
FC5-5436-000CN
Rail  - Rail rack - Mounts on the finisher main body - Four used
RM1-3252-000CN
Holder  - Main switch (SW11) holder assembly
RC1-9341-000CN
Cover  - Control panel support cover assembly - Includes the base structure, and control panel support piece - Mounts to the top of the ADF assembly - Does NOT include the control panel
RC1-8519-000CN
Torque_Limiter  - Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly
XF2-1608-840CN
Belt  - Timing belt - Located on the return roller assembly
RM1-3230-000CN
Holder  - Transfer contact holder assembly
RM1-3610-000CN
Cable  - DC controller board power cable
4S3-2117-000CN
Spring  - Tension spring - Provides tension to the front pressure plate (big spring)
4G1-2285-000CN
Cable  - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)
RM1-3340-000CN
Tray  - Face down end tray assembly
RC2-1315-000CN
Caster  - Caster - Used on pedestal assembly (universal)
RL1-1284-000CN
Cover  - Top cover assembly - Protects the top part of the main printer chassis
FM2-0720-000CN
Mount  - Flexible cable mount assembly
FM2-1708-000CN
Sensor  - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket
4G3-0210-000CN
Lock  - Upper cover lock assembly
RC1-9342-000CN
Cover  - Rear upper cover - Plastic cover that protects the upper rear part of the printer
4S3-0171-000CN
Gear  - 50-tooth gear - Located on the saddle assembly
FM2-1417-000CN
Sensor  - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle
RM1-3215-000CN
Lock  - Intermediate transfer belt (ITB) rear lock support assembly
RK2-1382-000CN
Fan  - Delivery unit cooling fan (FM7)
RC2-1284-000CN
Guide  - Side wall guide - Mounts on the upper height panel on the booklet maker unit
RM1-3228-000CN
Lock  - Intermediate transfer belt (ITB) front lock support assembly
RC1-8526-000CN
Guide  - Multi-purpose/tray 1 upper guide
RM1-3620-000CN
Cable  - SCANNER JOINT CABLE
RM1-4411-000CN
Arm  - T2 guide arm assembly
RM1-3617-000CN
Other_Parts  - FRONT CABLE
RM1-3619-000CN
Other_Parts  - REAR UPPER CABLE
XF2-3837-340CN
Belt  - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly
RM1-3589-000CN
Interlock  - Interlock switch assembly - Where the right door open detection sensor (SR11) mounts on
RM1-3254-000CN
Holder  - Cartridge contact holder assembly
RC1-9206-000CN
Rail  - Rear reverse scanner rail
RK2-2376-000CN
Sensor  - SENSOR UNIT, HUMIDITY
RL1-1335-000CN
Guide  - GUIDE, DUPLEXING FEED, UPPER
RM1-3240-000CN
Drawer  - Intermediate transfer belt (ITB) drawer assembly
FM2-0710-000CN
Switch  - Approach switch assembly - Includes approach switch plate and microswitch (MS33)
FM2-1423-000CN
Shaft  - Swing press shaft assembly
FM2-0707-000CN
Sensor  - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate
FB3-7928-020CN
Deflector  - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RC2-1347-000CN
Cover  - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit
RL1-1283-000CN
Guide  - Multi-purpose/tray 1 right guide assembly
RM1-3239-000CN
Cover  - Right side wall cover assembly
RC1-8959-000CN
Guide  - GUIDE, FACE-DOWN INNER
RC1-9278-000CN
Holder  - Fuser fan holder - Holds fan (FM2)
RC1-9511-000CN
Cover  - COVER, MOTOR
RC1-9344-000CN
Cover  - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors
FC5-3657-000CN
Torque_Limiter  - Torque limiter - Torque limiter for the swing press shaft
FM2-1639-000CN
Mount  - Delivery switch mount assembly
RM1-4415-000CN
Cover  - Rear right cover assembly
RM1-4392-000CN
Roller  - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque
RC1-9348-000CN
Cover  - COVER, INTERNAL, RIGHT
FB5-2697-000CN
Deflector  - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RM1-4128-000CN
Mount  - Lattice cable mount assembly
RM1-4407-000CN
Guide  - Paper delivery guide assembly
RM1-4409-000CN
Cable  - Fuser bias cable assembly
4S3-1050-000CN
Bearing  - Ball bearing (6902ZZNR)
RK2-1377-000CN
Fan  - Cooling fan - Provides air to the print cartridge and imaging drum area
FM2-0709-000CN
Holder  - Area sensor holder assembly
RC2-1280-000CN
Cover  - Lower left cover - Mounts on the saddle tray assembly
RK2-1378-000CN
Fan  - Fuser cooling fan (FM2) - Provides air to the fuser area
4G3-0271-000CN
Link  - Slide link assembly - Located on the top door assembly (upper cover)
4S3-2116-000CN
Spring  - Tension spring - Provides tension to the front pressure plate (small spring)
4G1-1498-000CN
Sensor  - Area sensor PCA assembly - Located on the area sensor holder assembly
FG3-2903-000CN
Cable  - CABLE, OPERATION TRAY
RK2-1356-000CN
Cable  - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
RM1-3225-000CN
Grip  - Front grip support assembly
RM1-3226-000CN
Grip  - Rear grip support assembly
RM1-5950-000CN
Cover  - Fuser fan cover assembly - Plastic cover located next to the rear cover assembly
RC1-9279-000CN
Holder  - Scanner fan holder - Holds fan (FM1)
FU5-0454-000CN
Gear  - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher
RK2-1370-000CN
Motor  - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly
RM1-4401-000CN
Duct  - Intermediate transfer belt (ITB) duct assembly
FC5-4221-000CN
Guide  - Tray roller guide - Mounts on the front side tray plate
RL1-1215-000CN
Rail  - Right cassette rail - For the 1 x 500-sheet paper input tray
RC1-9276-000CN
Duct  - Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area
RC1-9318-000CN
Other_Parts  - GUIDE, CABLE, E
RC1-9277-000CN
Holder  - Cartridge fan holder - Holds fan (FM3)
RM1-3391-000CN
Cable  - FACE-DOWN UNIT 2 CABLE
RM1-4141-000CN
PC_Board  - LED PCA assembly - Located on the stapler/stacker unit rear cover
RM1-4402-000CN
Holder  - Tag PCA holder assembly
XB4-5401-209CN
Screw  - Screw - M4 X 8mm long
RC1-9309-000CN
Duct  - Scanner fan duct - Directs air into scanner area
RL1-1213-000CN
Rail  - Left top rail - For the 1 x 500-sheet paper input tray
RM1-3250-000CN
Sensor  - Photo sensor (SR26) assembly - Fuser home position sensor
4A3-1779-000CN
Plate  - Rotation plate - Located next to the dowel pin on the saddle assembly
RM1-4391-000CN
Flag  - Face down full flag assembly
RC1-9308-000CN
Other_Parts  - GUIDE, CABLE, C
RM1-3623-000CN
Cable  - INTERFACE JOINT CABLE
RC1-9261-000CN
Clamp  - Formatter cable clamp - Holds formatter cable in a determine position
FM2-1401-000CN
Sensor  - Shutter sensor assembly
4G3-1624-000CN
Sensor  - Paper face sensing assembly - Located on the upper height panel
4A3-1955-000CN
Plate  - Grounding plate - Used only for booklet maker series
WG8-5696-000CN
Sensor  - Photo-interrupter sensor assembly (Does not include the sensor flag)
RM1-4400-000CN
Guide  - Guide sensor assembly - For fuser open cover detection sensor (SR34)
FB3-7881-000CN
Knob  - Knob - Mounts on the lower internal cover on the left side of the saddle assembly
RM1-3624-000CN
Cable  - Color plane registration joint cable
FC5-6978-000CN
Plate  - PLATE, OPTION TRAY, FRONT
RC1-8527-000CN
Cover  - Multi-purpose/tray 1 blanking cover
RC1-9211-000CN
Cover  - COVER, MAIN SWITCH
RC1-9323-000CN
Other_Parts  - GUIDE, CABLE, F
RC1-8961-000CN
Duct  - Air duct - Deflects air from fan FM7
XF9-0748-000CN
Belt  - Timing cogged belt - Located on the front side plate on the finisher main body
RC1-9043-000CN
Other_Parts  - BAND, DOOR
RG5-1928-000CN
Cable  - Registration cable assembly - Includes 7P and 3P connectors
RC1-9334-000CN
Other_Parts  - DUCT, SCANNER
RK2-1354-000CN
Cable  - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
RM1-5030-000CN
Cable  - CABLE, TP/T2 OPEN SENSOR
RC1-9185-000CN
Guide  - Intermediate transfer belt (ITB) front entrance guide
RM1-3217-000CN
Cable  - FIXING MOTOR CABLE
RM1-3622-000CN
Cable  - PANEL JOINT CABLE
RK2-1363-000CN
Thermistor  - Thermistor unit - Monitors the temperature inside the scanners
FC5-5004-000CN
Sensor  - Paper sensing sensor flag - Mounts on the lower height panel
RC1-9201-000CN
Cover  - Paper tray cassette back end cover - Protects the back end of the cassette tray rail
RC1-8928-000CN
Lever  - Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly
RC1-9307-000CN
Other_Parts  - GUIDE, CABLE, B
FU5-0457-000CN
Gear  - 17-tooth gear - Attaches to the rear tray side plate
RC2-1279-000CN
Cover  - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit
RC1-8511-000CN
Retainer  - Retainer (C Type) for Color LaserJet CP6015n.
FU5-1169-000CN
Bushing  - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly
FC5-5024-000CN
Knob  - Latch knob - Mounts on the open/close guide on the saddle guide assembly
FS6-0829-000CN
Gear  - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm
RC1-9190-000CN
Plate  - PLATE, FAN FIXING, FRONT
FU5-9059-000CN
Screw  - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
RM1-3389-000CN
Cable  - Control Panel cable
XF2-1607-860CN
Belt  - Timing cogged belt - Runs on ejection stack motor assembly (M32)
RK2-1355-000CN
Cable  - Laser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector
FM2-0718-000CN
Flag  - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper
RC1-9186-000CN
Guide  - Intermediate transfer belt (ITB) rear entrance guide
RC1-9332-000CN
Guide  - Fuser cable guide - Located on the fuser power supply assembly
RC1-9306-000CN
Other_Parts  - GUIDE, CABLE, A
FB3-7934-000CN
Rack_Slide  - Rear rack slide - Mounts on the rear saddle side plate
FB3-7967-000CN
Rack_Slide  - Front rack slide - Mounts on the front saddle side plate
RM1-3385-000CN
Cable  - Toner feed motor (M16) cable
RM1-3390-000CN
Cable  - FACE-DOWN UNIT 1 CABLE
RC1-9246-000CN
Plate  - Front sensor plate - For sensor (SR32)
RC1-8964-000CN
Duct  - Face down joint duct - Located behind the fuser assembly
FU5-0435-000CN
Gear  - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member
RC1-9312-000CN
Other_Parts  - GUIDE, CABLE, D
FS5-3576-000CN
Gear  - 30-tooth gear
4A3-1763-000CN
Arm  - Front adjustment arm - Located on the folding roller on the saddle assembly
4A3-1764-000CN
Arm  - Rear adjustment arm - Located on the folding roller on the saddle assembly
4A3-1782-000CN
Stop  - Lever stopper
RU5-0790-000CN
Gear  - 83/25-tooth gear - Mounts on the fuser motor plate
RC1-9189-000CN
Other_Parts  - ARM, 1ST ESTRANGEMENT
FU5-2399-000CN
Gear  - 29-tooth gear - Runs on the paper feeder motor assembly
FS5-3577-000CN
Pulley  - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag
RC1-9326-000CN
Plate  - HVT-A (high-voltage transmission) guard plate
RC1-8931-000CN
Rail  - RAIL, FIXING, FRONT
RC2-1356-000CN
Ground  - Grounding plate - Located on the rear left side of the saddle assembly
RC1-9360-000CN
Cover  - COVER, FACE-DOWN DRIVE
RC2-1734-000CN
LED  - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit
FU5-3086-000CN
Pulley  - 20-tooth pulley
FS6-0830-000CN
Gear  - 16-tooth gear - Runs on the folding roller next to the front adjustment arm
RM1-3630-000CN
Cable  - Multi-purpose/tray 1 cable
FS6-0822-000CN
Gear  - 16/33-tooth gear - Runs on the shaft located under the folding roller
RM1-3383-000CN
Cable  - Toner feed motor (M17) cable
RC1-9324-000CN
Holder  - Environment sensor holder - Holds the humidity sensor unit
RC1-9220-000CN
Lever  - LEVER, DOOR INTERLOCK SHUTTER
RC1-9235-000CN
Plate  - PLATE, DRAWER GUARD
RC1-9300-000CN
Other_Parts  - BUTTON, MAIN SWITCH
RC1-9238-000CN
Plate  - PLATE, CONTROL PANEL GROUNDING
XD9-0234-000CN
Clip  - E-Type retainer ring
FU5-0428-000CN
Gear  - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley
FB3-7980-000CN
Spring  - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate
FS6-0815-000CN
Gear  - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)
FS6-0823-000CN
Gear  - 16-tooth gear - Runs on the shaft located under the folding roller
FS6-2582-000CN
Spring  - Tension spring - Provides tension to the pressure plate assembly
FC5-5542-000CN
Guide  - Entrance sheet guide - Mounts on the cross member entrance guide
FB3-7973-000CN
Holder  - Roller holder 2 - For the cam shaft
FB3-7925-030CN
Flag  - Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly
XA9-1495-000CN
Screw  - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
XA9-1504-000CN
Screw  - M3 truss head (flanged) screw - 8mm long
XA9-1801-000CN
Screw  - M13x12 RS screw - Used to secure metal to metal
XB1-2300-407CN
Screw  - M3x4 machined truss-head screw
XB1-2400-805CN
Screw  - SCREW MACHINE TRUSS HEAD M4
WT2-5694-000CN
Clamp  - Snap-in cable clamp
XA9-1422-000CN
Screw  - M4 X 12mm machine screw with washer
XA9-1448-000CN
Screw  - Screw - M4 X 8mm long
XA9-1449-000CN
Screw  - M3 pan-head Phillips screw with machine threads - 8mm long
XA9-1469-000CN
Hardware  - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
RU5-0791-000CN
Gear  - 34-tooth gear - Mounts on the fuser motor plate
RU5-2796-000CN
Spring  - Tension spring - Provides tension to the paper sensing lever
RU5-2822-000CN
Spring  - Tension spring - Provides tension to the scanner assembly
RU5-2825-000CN
Spring  - Torsion spring - Located on the back of the scanner assembly
VS1-7177-002CN
Connector  - Fuser electrical connector
RM1-5029-000CN
Cable  - CABLE, FIXING OPEN SENSOR
RC1-9233-000CN
Other_Parts  - SPRING, LEAF
XB4-7401-005CN
Screw  - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
XB6-7303-005CN
Screw  - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic
XD2-3100-152CN
Ring  - C-type external retainer ring
XD3-2300-142CN
Pin  - Dowel pin - Located next to the 17-tooth gear on the output bin 2
XD3-2300-202CN
Pin  - Dowel pin - Locate next to the 50-tooth gear
FB5-5937-020CN
Flag  - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate
FB3-7979-000CN
Flag  - Flag sensor - Located on the rear saddle side plate
FC5-5005-000CN
Spring  - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel
FS6-0814-000CN
Gear  - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley
XD9-0240-000CN
Other_Parts  - PIN, DOWEL
FC5-5021-000CN
Latch  - Right latch claw
4A3-4715-000CN
Plate  - Stop hinge plate - Used only for booklet maker series
RC1-9244-000CN
Spring  - Torsion spring - Provides torsion to the front fuser fan plate
RC1-9260-000CN
Holder  - HOLDER, SCANNER THERMISTOR
RC1-9328-000CN
Holder  - High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover
RC1-9329-000CN
Guide  - Cable guide - Cover for the panel cable
RC1-8939-000CN
Rail  - RAIL, FIXING, REAR
RC1-8734-000CN
Bushing  - Bushing - Located on the registration second transfer assembly
RC1-9208-000CN
Foot  - Chassis rubber foot
RL1-1216-000CN
Plate  - Fuser motor (M11) plate
RL1-1289-000CN
Roller  - Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray
RC1-8567-000CN
Roller  - Multi-purpose paper pick-up roller
RM1-3360-000CN
Cover  - Switchback cover assembly
RM1-4113-000CN
Tray  - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242)
RM1-3319-000CN
Roller  - 2nd transfer roller assembly
UL413E
Care_Pack  - HP 3 year Next business day Onsite Defective media retention color LaserJet CP6015 Support
UL414PE
Care_Pack  - HP 1 year PW Next business day Onsite Defective media retention color LaserJet CP6015 Support
UL624E
Care_Pack  - HP Secure Hard Disk Installation and Startup Service
H2872E
Care_Pack  - HP Network Installation mid-high Color LaserJet printer Service
H4515E
Care_Pack  - HP Installation mid-high Color LaserJet printer Service
HC130PE
Care_Pack  - HP 1 year Post Warranty Phone Assist Color LaserJet 3-9xxx/Scanjet N7xxx-9xxx Service
Q3932A
Color_LaserJet  - HP Color LaserJet CP6015dn Printer
UJ177E
Care_Pack  - HP 3 year Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ178E
Care_Pack  - HP 4 year Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ179E
Care_Pack  - HP 5 year Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ180E
Care_Pack  - HP 3 year 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ181E
Care_Pack  - HP 3 year 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ182E
Care_Pack  - HP 4 year 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ183E
Care_Pack  - HP 4 year 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ184E
Care_Pack  - HP 5 year 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ185E
Care_Pack  - HP 5 year 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ186PE
Care_Pack  - HP 1 year Post Warranty Next business day Onsite Color LaserJet CP6015 Hardware Support
UJ187PE
Care_Pack  - HP 1 year Post Warranty 4 hour response 9x5 Onsite Color LaserJet CP6015 Hardware Support
UJ188PE
Care_Pack  - HP 1 year Post Warranty 4 hour response 13x5 Onsite Color LaserJet CP6015 Hardware Support
UJ189E
Care_Pack  - HP MKRepl Color LaserJet CM6030/40MFP and CP6015 Color printer fuser 110V Service
UJ192E
Care_Pack  - HP MK Repl Clr LaserJet CM6030/40MFP and CP6015 Color printer TransferKit Service
UJ573E
Care_Pack  - HP MK Replacement Color LaserJet CM6030/40MFP and CP6015 Color Roller Kit Service
UT808PE
Care_Pack  - HP 2 year Post-Warranty Next business day onsite Color LaserJet CP6015 Hardware Support
UT981E
Care_Pack  - HP 4 year Next business day Onsite + Defective Media Retention Color LaserJet CP6015 Support
UU862E
Care_Pack  - HP 5 year Next business day Onsite + Defective Media Retention Color LaserJet CP6015 Support
Q3931-67906
Filter  - Air filter kit
XG9-0586-000CN
Bearing  - Ball bearing - Located on the fixing one way gear assembly
RC1-8925-000CN
Gear  - DAMPER, GEAR
RM1-3640-000CN
Cable  - Waste toner sensor cable
XB2-8300-607CN
Screw  - M3x6 screw with washer

Private Police Terms And Conditions Terms of Agreement

网络文化经营许可证：浙网文[2013]0268-027号|增值电信业务经营许可证：浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.