News - HP LaserJet 4350 Parts

year

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP LaserJet 4350 Parts

sourcehttp://www.printerparts-hp.com

publisherJacky

time2012/09/02

Part	Description
Q7719-67951	Memory - HP 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q2444-67902	Tray - 1500 sheet paper tray and feeder assembly for LaserJet 4200/4300 series printers
Q2444B	Feeder - 1500 sheet high capacity paper input tray
Q2444A	Feeder - 1500 sheet paper tray and feeder assembly for LaserJet products series printers.
Q7715-67951	Memory - HP 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q5422-67903	Maintenance_Kit - HP LaserJet 4250/4350 maintenance kit - (220V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray and installation instructions
RM1-1067-030CN	Laser_Scanner - Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers
Q5421-67901	Maintenance_Kit - HP LaserJet 4250/4350 maintenance kit - (120V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray and installation instructions
RM1-1071-000CN	Power_Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC operation
J7942G	Print_Server - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module
RM1-1070-040CN	Power_Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC operation
RM1-1070-050CN	Power_Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC operation
RM1-1070-000CN	Power_Supply - Power supply assembly - For LaserJet 4240/4250/4350 - For 110VAC to 127VAC operation
J7934-61011	Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
Q3653-67904	PC_Board - Formatter board assembly - 4250/4350 non-network capable models only
Q3653-67905	PC_Board - Formatter board assembly
J6058A	Print_Server - HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot
Q3653-69004	PC_Board - Formatter board assembly - 4250/4350 non-network capable models only
J7934-61001	Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
J7934-69011	Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
Q5421-67903	Maintenance_Kit - HP LaserJet 4250/4350 maintenance kit - (120V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray and installation instructions
Q3653-69005	PC_Board - LaserJet 4250/4350 Formatter board assembly
J7960A	Print_Server - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port
J7934-69001	Print_Server - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7960G	Print_Server - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port
Q2443B	Paper_Stacker - 500 sheet stapler stacker paper output assembly
Q2443-67908	Stacker_Assembly - 500 sheet stapler stacker paper output assembly
Q2443-69001	Stacker_Assembly - 500-Sheet paper stacker/stapler assembly - Provides additional output capacity and can staple output copies for the LaserJet 4200 or 4300 printers - Mounts on top of the printer
J7934G	Print_Server - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
J7934A	Print_Server - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
Q6506-69010	PC_Board - Formatter (main logic) board - For HP Laserjet 4240/4250/4350 series only
Q3653-69007	PC_Board - Formatter board assembly - For Laserjet 4250/4350 non-network capable models only - Version 08.009
RM1-1083-090CN	Fuser_Assembly - Fuser assembly - For 220 VAC - For LaserJet 4250/4350 series
RM1-1083-070CN	Fuser_Assembly - Fuser assembly - For LaserJet 4250/4350 series - 220 VAC
Q2439-67902	Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
Q2439-69002	Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
Q2440B	Tray - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of
Q2440-69003	Feeder - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of
Q6506-67907	PC_Board - PC FORMATTER
Q5942-67902	Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000 pages
J7942A	Print_Server - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - power module
RM1-1067-000CN	Laser_Scanner - Replacement for part RM1-1067-000CN Laser/scanner assembly for 4250/4350 series LaserJet printers
Q5421A	Maintenance_Kit - HP LaserJet 4250/4350 maintenance kit - (120V) - Includes Fuser Assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray and installation instructions
Q6505-69010	PC_Board - Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1
Q6505-69005	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only
Q6505-67905	PC_Board - Formatter (main logic) PC board assembly - For LaserJet 4240/4250/4350 - For network capable models only - Version 08.017.1
Q6505-67907	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only
Q3652-67904	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only
Q3652-69004	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only
Q3652-69005	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only
Q6505-69009	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only.
Q3652-67907	PC_Board - Formatter board assembly - 4250/4350 network capable models only
Q3652-69007	PC_Board - Formatter board assembly - For network capable models only (Laserjey 4240/4250/4350)
Q3652-67905	PC_Board - Formatter board assembly - 4240/4250/4350 network capable models only
Q2439B	Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
RM1-1082-000CN	Fuser_Assembly - Fuser Assembly - For 110 VAC - Bonds toner to paper with heat
RM1-1082-070CN	Fuser_Assembly - Fuser assembly - For LaserJet 4250/4350 series - 110 VAC
RM1-1082-090CN	Fuser_Assembly - Fuser assembly - For LaserJet 4250/4350 series - 110 VAC
Q2440-67903	Feeder - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of
Q2439-69003	Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers
J3265A	Print_Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J6073A	Hard_Drive - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots
J6073G	Hard_Drive - High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots
Q2438-67902	Feeder - Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer
Q6506-69005	PC_Board - LaserJet 4250/4350 Formatter board assembly
Q2438B	Feeder - Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer - Includes the envelope tray and multi-lingual installation instructions
Q2443A	Feeder - 500 sheet stapler stacker paper output assembly
Q5942X	Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000 pages
Q5942-67901	Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 10,000 pages
RM1-1080-000CN	Cover - Cartridge access door cover for LaserJet 4250/4350 family
RG1-4276-030CN	Drive_Assembly - Control panel assembly
RM1-1195-000CN	Control_Panel - Control panel assembly
Q9121A	Memory - 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
RM1-1108-060CN	PC_Board - DC controller board - DC Controller for LaserJet 4250/4350 series
RM1-1108-000CN	Controller - DC controller board - DC Controller for LaserJet 4250/4350 series
J6035C	Print_Server - HP JetDirect 175X Fast Ethernet external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
Q2442-67902	Paper_Stacker - 500-Sheet paper stacker assembly - Provides additional output capacity for the LaserJet 4200/4250 or 4300/4350 printers - Mounts on top of the printer
Q2442B	Paper_Stacker - 500-sheet paper stacker output assembly
Q2626-67951	Memory - 128MB, 100-pin, DDR SDRAM DIMM memory module
J6035A	Print_Server - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
Q7718-67951	Memory - 128MB, 100-pin, DDR SDRAM DIMM memory module
Q2626A	Memory - HP 128MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q2627-67951	Memory - HP 256MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q5942A	Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 10,000 pages
RM1-0273-070CN	Cover - Front cover (or door) - Provides access to load paper in the 1,500 sheet paper feeder assembly
Q7714-67951	Memory - 48MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM1-1088-070CN	Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into
RM1-0012-020CN	Roller - Paper feed roller assembly
RM1-1108-130CN	PC_Board - DC controller board - DC Controller for LaserJet 4250/4350 series
Q6007-67951	Memory - HP 48MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7725-67954	Memory - Flash memory - 32MB Flash memory card for LaserJet 4240, 4250 and 4350 series - Version 08.013.4
Q7725-67943	Firmware - Replacement for part Q7725-67943 ORDER Q7725-67954 LJ4240/50/4350 32MB FLSHMEM CD 08.011.1
RM1-0043-020CN	Plate - Swing plate assembly - For Tray 2 paper lift assembly and engages the fuser assembly.
5851-2766	Plate - Swing plate assembly kit - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear
Q7717-67951	Memory - HP 96MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q6009-67951	Memory - HP 96MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM1-1097-000CN	Input_Assembly - Tray 1 paper input assembly
RM1-1097-040CN	Tray - Tray 1 paper input assembly
RM1-0034-070CN	Pickup_Assembly - Paper pickup assembly - Paper pickup drive assembly for Tray 1/Multipurpose input tray
Q5400-90932	Manual - LaserJet 4200/4250/4300/4350 combined service manual - English only
RK2-0278-000CN	Fan - Cooling fan on left side of printer - FN101
RK2-0272-000CN	Motor - Main motor - M101
RK2-0274-000CN	Motor - Toner cartridge motor - Motor on front right side of printer (M102)
RM1-1098-030CN	Roller - Registration roller assembly
RK2-0273-000CN	Motor - Main motor - M101
RM1-1098-000CN	Roller - Registration roller assembly
RM1-0011-000CN	Registration - REGISTRATION ASSEMBLY UNIT
RG1-4374-000CN	PC_Board - 1500 sheet feeder assembly PC board
RK2-0280-000CN	Fan - Cooling fan on right side of printer - Print cartridge fan - FN103
Q2625A	Memory - HP 64MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q2625-67951	Memory - HP 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM1-1066-000CN	Drive_Assembly - Main drive assembly - Main gear assembly on right side of printer
RM1-0002-030CN	Gear - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability
RM1-1081-000CN	Cover - Top cover assembly - Top paper output tray and top of printer
RM1-0274-020CN	Cover - Front cover assembly
RM1-1110-000CN	Roller - Transfer roller assembly - Long black spongy roller - Transfers charge to paper
RM1-0026-040CN	Roller - Paper delivery assembly - Paper output roller assembly
RM1-0026-020CN	Delivery - PAPER DELIVERY ASSY.
RM1-0026-000CN	Delivery - Paper delivery assembly
8121-0921	Power_Cord - Power cord (Black) - 16 AWG, 2.5m (8.2ft) long - Has straight (F) C13 receptacle (for 125 VAC in USA and Canada)
RM1-0056-040CN	Drive_Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly
Q7725-67985	Memory - LJ4240/4250/4350 FMC-32MB Flas
Q3216-60500	Cartridge - Staple cartridge assembly - Has 1,000 staples - For the staple module assembly in the 500-sheet stacker/stapler unit
Q3216A	Cartridge - Staple cartridge assembly - Has 1,000 staples - For the staple module assembly in the 500-sheet stacker/stapler unit
RM1-0056-070CN	Drive_Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly
RM1-1136-000CN	Drive_Assembly - Lifter drive assembly for 1500 sheet feeder
RM1-0043-000CN	Swing - SWING PLATE ASSEMBLY - FOR TRAY 2 PAPER LIFT ASSEMBLY UNIT.
RM1-0043-060CN	Plate - Swing plate assembly - For Tray 2 paper lift assembly unit
RM1-0043-050CN	Plate - Swing plate assembly - For Tray 2 paper lift assembly and engages the fuser assembly.
RM1-0043-010CN	Plate - SWING PLATE ASSEMBLY - FOR TRAY 2 PAPER LIFT ASSEMBLY UNIT
RC1-0061-000CN	Spring - Torsion spring
RC1-3280-000CN	Cover - Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot
RM1-1077-000CN	Cover - Left side cover panel
RC1-0661-000CN	Cover - Right side cover assembly - For the 1,500 sheet paper feeder assembly
RM1-1133-020CN	Drive_Assembly - Paper pickup roller drive assembly for 1500 sheet feeder
RM1-1074-040CN	Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray
RM1-0285-000CN	Sensor - Paper sensor assembly - Includes the support tray with the paper stack surface and paper detection sensors, associated sensor flags, and cable assembly
RM1-1074-000CN	Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray
RM1-0248-000CN	Tray - Paper (delivery) tray assembly - Holds the output from the 500-sheet paper stacker (or stacker/stapler) assembly - Snap-locks on the front of the assembly
RM1-1094-000CN	Drive_Assembly - Lifter drive assembly for 500 sheet feeder
RM1-0037-020CN	Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RM1-0037-000CN	Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RM1-1216-020CN	Cable - Fuser cable - Main fuser cable for LaserJet 4250 series
RC1-7890-000CN	Stop - Detent stop for 500 sheet feeder
C6518A	Cable - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
Q5406-67911	NamePlate - LaserJet 4250 Nameplate kit - Includes nameplates for LaserJet 4250/n, tn, dtn, dtnsl and HP logo jewel.
RM1-0005-020CN	Tray - Drop down Tray 1 - Includes adjustable paper width guide assembly
C2950A	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RC1-3282-000CN	Cover - Lower rear cover - Covers rear of standard 500 sheet tray
RC1-3352-000CN	Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly
RL1-0264-000CN	Gear - Gear - Gear with attached shaft - Driven by pickup drive assembly on right front of printer
RH7-1603-000CN	Motor - Motor - Stepper motor in 1500 sheet feeder assembly
RM1-1076-000CN	Cover - Right side cover assembly
RC1-3338-000CN	Duct - Fan duct - Air duct and fan mount for Fan 2 - Fan duct on right side of printer
RC1-0662-000CN	Cover - Left side cover assembly - For the 1,500 sheet paper feeder assembly
RC1-0663-000CN	Cover - Rear cover assembly - Box type cover for the rear of the 1,500 sheet paper feeder assembly
RC1-0335-000CN	Torque_Limiter - Torque limiter - Torque limiter for 500 sheet paper feeder pickup roller
RC1-0488-020CN	Cover - Right side cover for 500 sheet paper feeder assembly
WG8-5624-000CN	Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
RM1-1094-050CN	Drive_Assembly - Lifter drive assembly for 500 sheet feeder
RM1-0027-020CN	Cover - Rear output tray assembly - Includes upper rear paper output tray and cover
RM1-1216-000CN	Cable - Fuser cable - Main fuser cable for LaserJet 4250 series
RK2-0269-000CN	Solenoid - Paper pickup solenoid
RK2-0290-000CN	Cable - Ribbon cable - Between DC Controller board (J80) and power supply board (J50)
RC1-3339-000CN	Bracket - Fan rod - Metal rod that mounts against Fan 2 on right side of printer - Used for noise reduction of Fan 2
RM1-0294-000CN	Sensor - Paper size sensor assembly - Includes the three size fingers, micro-switch assembly and housing assembly
RK2-0359-000CN	Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up.
5063-1256	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RC1-3303-000CN	Stop - Detent stop for 500 sheet feeder
RC1-3340-000CN	Guide - DC Controller board cable guide
RC1-0509-000CN	Cover - Rear cover - Rear plastic cover for 500 sheet paper feeder
RC1-0307-000CN	Spring - Grounding leaf spring - Attaches to right side bottom of top cover assembly
RH7-1603-020CN	Motor - Motor - Stepper motor in 1500 sheet feeder assembly
RM1-0050-000CN	Cover - Front cover - Drop down Tray 1
RC1-0274-020CN	Guide - Paper feed belt guide for right side
RM1-0050-050CN	Cover - Front cover - Drop down Tray 1
RG1-4221-000CN	Cable - Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107
RM1-0036-000CN	Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette
RM1-0286-020CN	Gear - Paper level sensor gear assembly
8121-0740	Power_Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan)
VS1-7333-006CN	Connector - Duplexer connector - Connector on power supply assembly for duplexer
RM1-1218-000CN	Cable - A/C input connector/cable - 120VAC input connector to J1 power supply connector
RM1-1219-000CN	Cable - A/C input connector/cable - 220VAC input connector to J1 power supply connector
VS1-7334-006CN	Connector - Connector (6-point)
RC1-0060-030CN	Flag - Paper feed sensor flag for Tray 1
RM1-0286-000CN	Gear - Paper level sensor gear assembly
RC1-0209-000CN	Flag - Paper sensor flag for Tray 2 paper pickup assembly
XD9-0234-010CN	Retainer - E-Type retainer ring/clip
RM1-1189-000CN	Cable - Top bin full sensor cable
RC1-0289-000CN	Cover - Top rear cover of printer - Removes for Stapler/Stacker installation
RC1-3304-000CN	Tab - Tray number display - Changeable tray number tab for optional 500 sheet feeder
J6060A	Print_Server - HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack
J6061A	Print_Server - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable
J6072A	Print_Server - HP bt1300 Bluetooth wireless printer adapter - Allows for wireless printing from Bluetooth enabled PCs, PDAs, phones, and cameras - Connects to either the parallel or USB port on the printer - Includes the power module and power cord
J3258A	Print_Server - HP JetDirect 170X external print server
Q2445-67902	Stand - Printer stand with storage cabinet
Q2627A	Memory - HP 256MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q2628A	Memory - HP 512MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
J6035B	Print_Server - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
RU5-0277-000CN	Gear - Gear for swing plate Assembly HP laserjet 4200 4300 Series 41T gear.
C2951A	Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
RM1-1193-000CN	Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector
RC1-0487-020CN	Cover - Left side cover for 500 sheet paper feeder assembly
RK2-0288-000CN	Cable - Ribbon cable - Between DC Controller board (J81) and power supply board (J51)
RM1-1192-000CN	Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector
RC1-0288-000CN	Cover - Formatter board cover
RM1-0041-020CN	Sensor - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly
RC1-0019-000CN	Cover - Inner right front cover
RM1-1198-000CN	Cable - Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83
RK2-0349-000CN	Clutch - Paper feed assembly clutch - Electro mechanical clutch that connects to the white 30 tooth gear - CL 101
RM1-5078-000CN	Cable - Inlet cable - For 110 VAC to 127 VAC
RK2-0276-000CN	Solenoid - Tray 1 solenoid - Engages Tray 1 pickup roller
RC1-3356-000CN	Overlay - Control panel overlay - English
RM1-5079-000CN	Cable - Inlet cable - For 220 VAC to 240 VAC
RM1-0042-000CN	Connector - Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer
RM1-1190-000CN	Cable - Control panel cable
RC1-0320-000CN	Cover - Envelope cover - Plastic piece above Tray 1 pickup roller
RC1-0486-020CN	Cover - Upper front cover - Small piece of plastic on top front edge of 500 sheet feeder
VS1-7500-006CN	Connector - Connector (6-point)
WC4-5139-000CN	Switch - Top cover interlock access switch
RL1-0013-000CN	Mount - Swing plate - Pivot mount for pickup roller shaft
VS1-7514-006CN	Connector - Duplexer connector - Connector on power supply assembly for duplexer
RC1-0136-000CN	Bushing - Roller bushing - Bushing that supports middle of paper delivery roller
RL1-0019-000CN	Roller - Tray 1 pickup roller - D shaped roller under envelope cover
RC1-0269-020CN	Guide - DC Controller flat cable guide
RC1-0330-020CN	Damper - Solenoid damper - Locate on right side of Tray 2 guide - Works with kicker to dampen Tray 2 pickup solenoid on right side of tray guide
XD9-0234-000CN	Clip - E-Type retainer ring
RU5-0050-000CN	Gear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch
RC1-0208-030CN	Holder - Paper sensor flag holder
RC1-0273-000CN	Guide - Paper feed belt guide for left side
XA9-1503-000CN	Screw - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long
RC1-0211-000CN	Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly
RC1-0268-000CN	Rod - Metal rod between external power button and switch on power supply board
RC1-0212-000CN	Holder - Paper pickup arm holder - Holder for pickup roller shaft
RC1-0242-000CN	Guard - Inner right side edge guard - Small plastic guard that protects wires inside chassis on right side of printer.
RC1-0247-000CN	Guard - Right side edge guard - Small plastic guard that protects wires - Mounts on right outer side of printer chassis.
RC1-0264-000CN	Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft.
RC1-0153-030CN	Guide - Right side Tray 2 paper cassette guide
RC1-0200-020CN	Drive_Assembly - Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly
XD9-0232-000CN	Clip - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
RC1-0270-020CN	Guide - DC Controller board cable guide
RC1-0060-050CN	Flag - Paper feed sensor flag for Tray 1
RC1-0209-020CN	Flag - Paper sensor flag for Tray 2 paper pickup assembly
RC1-0198-000CN	Spring - Tension spring - Provides tension for lifter drive assembly
RC1-0213-000CN	Spring - Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly
RC1-0343-020CN	Holder - Thermistor holder - Metal outside half of thermistor holder
RC1-0344-020CN	Cover - Fan cover - Metal support strap that main cooling fan fastens to - For fan FN101, main cooling fan on right left side of printer
RC1-0371-000CN	Gear - 23 Gear - Gear that drives paper feed roller - Attaches to feed roller shaft
RC1-0385-000CN	Guide - Guide for scanner cable 2
RC1-0386-000CN	Guide - Connecting cable guide - Routes and protects all cables running from top portion of printer to the DC controller board
RC1-0500-020CN	Cover - Cover plate - Plastic cover on right front corner of 500 sheet feeder tray - Covers removable tray number designator plate
RL1-0015-000CN	Flag - Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer
RG1-4204-000CN	Cable - Size sensor cable - Cable that connects to paper size sensors in 500 sheet feeder assembly
RU5-0040-000CN	Gear - Gear - 23 tooth gear in lower front section of pickup drive assembly
RC1-0748-000CN	Sensor - Paper size sensor block - Spring loaded block which activates the paper size sensor fingers
RU5-0045-020CN	Gear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly
RC1-0340-020CN	Guide - Guide for scanner cable 1
RC1-1923-000CN	Spring - Torsion spring - Provides tension for paper sensor flag
XA9-1420-000CN	Screw - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long
XA9-1500-000CN	Screw - M3 pan-head Phillips screw with flat washer - 8mm long
RU5-0015-000CN	Gear - 14T/30T cluster gear
RB1-8107-000CN	Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
RU5-0088-000CN	Gear - 18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly
RC1-0243-000CN	Guide - Right front power supply guide - Attaches to right side of printer chassis
RC1-0244-000CN	Guide - Support guide - Supports right rear side of power supply board
RG1-4239-000CN	Cable - Interface cable assembly - Connects between the 6-pin interface connector and the feeder control board
RG1-4240-000CN	Cable - Media size sensor cable assembly - Connects between the paper size sensor assembly and the feeder control board
RG1-4241-000CN	Cable - Front door sensor cable - Connects between the sensor in the feeder lifter drive assembly and the feeder control board
RC1-0254-000CN	Spring - Torsion spring - Provides tension for Tray 2 kicker - Mounts on Tray 2 guide assembly
RG1-4213-000CN	Cable - Top Cover cable - From top cover microswitch (SW101) to DC Controller board
RC1-0266-020CN	Screw - M3 stepped shaft screw
RC1-0206-000CN	Bushing - Bushing - On right side of paper pickup drive assembly
RL1-0007-000CN	Pad - Tray 1 paper separation pad
Q7901A	Label - White address labels - 1/2 inch x 1-3/4 inches - 15 sheets per package
Q7902A	Label - White address labels - 1 inch x 2-5/8 inches - 15 sheets per package
UT822PE	Care_Pack - HP 2 year Post-Warranty Next business day onsite LaserJet 4350 5100 5200 Hardware Support
J7951G	Print_Server - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software
UK673PE	Care_Pack - HP 1 yr Post Warranty Next Business Day plus Defective Media Retention LaserJet 4350 5200 Support
J3265G	Print_Server - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J7951A	Print_Server - HP Jetdirect ew2400 802.11g wireless print server module
HC128PE	Care_Pack - HP 1 year Post Warranty Phone Assist LaserJet 33-52xx/Scanjet 7-8xxx service
U3472PE	Care_Pack - HP 1 year Post Warranty Next business day Onsite LaserJet 4350 5100 5200 Hardware Support
U3511PE	Care_Pack - HP 1 year Post Warranty 4 hour response 13x5 OnsiteLaserJet 4350/ 5100/ 5200 Hardware Support
U6397PE	Care_Pack - HP 1 year Post Warranty 4 hour response 9x5 OnsiteLaserJet 4350/ 5100/ 52xx Hardware Support
UA311E	Care_Pack - HP Maintenance Kit Replacement for LaserJet 4240 4250 4350 Fuser 110V Service
J3258G	Print_Server - HP JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network
Q6506-67908	PC_Board - Formatter board assembly V08.013.4
J6035D	Print_Server - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
Q6541A	Paper - HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets
7121-8286	NamePlate - HP jewel - Small plastic HP logo that attaches to top of printer
Q6506-69009	PC_Board - Formatter board assembly- For laserjet 4240/4250/4350
Q2419A	Paper - High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 200 sheets per box
Q3653-67907	PC_Board - Formatter board assembly - For Laserjet 4250/4350 non-network capable models only - Version 08.009
Q5406A	LaserJet - HP LaserJet 4350 Printer
J4102C	Print_Server - HP Jetdirect 170x Office Connect Print Server
Q5406A-Manual	Service_Guide_PH - HP LaserJet 4350 Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
Q2445B	Stand - HP printer stand and cabinet (LJ4200/4300)
7121-8044	NamePlate - Logo Emblem HP Jewel No.5
Q7725KE	Memory - Flash memory card - 32M - Version 08.013.4