News - HP LaserJet 5M Parts

year

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP LaserJet 5M Parts

sourcehttp://www.printerparts-hp.com

publisherJacky

time2012/09/05

Part	Description
J2555B	Print_Server - Token ring LAN interface board - DB-9 and RJ-45 connectors
5182-2806	Fuser_Assembly - Fuser Assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains ten new fusing assemblies)
J2590A	Print_Server - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
J3264A	Print_Server - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J4105A	Print_Server - JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors
J2556B	Print_Server - EtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector
C3918A	PostScript - Adobe's PostScript (level two) SIMM module - Includes 2MB additional memory and 35 adobe typefaces
C3920A	Duplexer - Duplexer assembly - For two sided printing
J2552B	Print_Server - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors
C3931A	Memory - 4MB flash SIMM for LaserJet 5 - Used to store special fonts and forms downloaded from the host
C3918-69001	PostScript - Adobe's PostScript (level two) SIMM module - Includes 2MB additional memory and 35 adobe typefaces
J2550B	Print_Server - EtherTwist (10Base-T) LAN interface board
J4106A	Print_Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector
RG5-0969-040CN	Power_Supply - High voltage power supply assembly
C3917A	LaserJet - HP LaserJet 5M Printer
J4101B	Module - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
C3930A	Memory - 2MB flash SIMM for LaserJet 5 - Used to store special fonts and forms downloaded from the host
J2591A	Print_Server - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
C3133-67901	Memory - 8MB, 70nS, 36-bit parity SIMM memory module
J4101-61011	Print_Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector
C2037-69002	Fuser_Assembly - Fuser Assembly (240V) - Bonds toner to paper by heat
C3130-60001	Memory - 1MB, 32-bit SIMM memory module
J2383-61005	Module - External token ring interface module - Has DB-9 connector
J3265A	Print_Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
RG1-3503-000CN	Power_Supply - Power supply assembly
RG1-3582-000CN	PC_Board - Duplexer controller board
C3921A	Upgrade_Kit - Lower cassette upgrade (500 sheet feeder) for LaserJet 5/N/M - With 500 sheet multi-size paper tray
J2594-61011	Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
C3133A	Memory - 8MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
C2037-69007	Power_Supply - Power supply assembly - 220/240VAC
RG5-2500-000CN	Power_Supply - Power supply assembly - 220/240VAC
RG5-0903-070CN	Laser_Scanner - Laser/scanner assembly
C2037-69008	Laser_Scanner - Laser/scanner assembly
RG5-2499-000CN	Power_Supply - Power supply assembly - 100-120VAC input
C3916-67912	Maintenance_Kit - FUSER ASSMBLY/SEP PAD/
J4102B	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J3258B	Print_Server - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
RG5-0880-130CN	Fuser_Assembly - Fuser Assembly (240V) - Bonds toner to paper by heat
C3916-69001	Maintenance_Kit - Maintenance kit (120V) - Includes Fuser Assembly, separation pad, transfer roller, tray 1,2,and 3 pickup rollers and instruction manual
RG5-2209-000CN	Drive_Assembly - Lower cassette drive assembly (drive motor and gears)
C3132-67901	Memory - 4MB, 70nS, 36-bit parity SIMM memory module
J2590-61011	Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2555-69013	Print_Server - Token ring LAN interface board - DB-9 and RJ-45 connectors
J4100-61001	Print_Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
J2552-60001	Print_Server - HP JETDIRECT CARD RJ45 10 BASE-T INTERNAL PRINT SERVER 10-100Base-TX or 10Base-2 Local Talk
RG5-0879-130CN	Fuser_Assembly - Fuser Assembly (120V) - Bonds toner to paper by heat
C2037-69001	Fuser_Assembly - Fuser Assembly (120V) - Bonds toner to paper by heat
J3258-61021	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C3919-69001	PC_Board - Formatter (Main Logic) board
C2991A	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
0950-2623	Power_Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts.
J4106-61001	Print_Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector
RG5-2195-000CN	Pickup_Assembly - Paper pickup (Feeder) assembly (Motor driven)
C3916-69005	Pickup_Assembly - Paper pickup (Feeder) assembly (Motor driven)
C3132A	Memory - 4MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
J4102-61021	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
RG5-2238-000CN	Control_Panel - Control panel board (with display) - Does NOT include the panel overlay or display window
C3916-69002	Maintenance_Kit - Maintenance kit (220V) - Includes Fuser Assembly, separation pad, transfer roller, tray 1,2,and 3 pickup rollers, and instruction manual
H3968-60001	Repair_Kit - Paper exit jam repair kit - Includes upper and lower delivery rollers, output rollers and roller pressure springs - Installation procedure requires service manual
C3923A	Tray - HP LaserJet 5, 5M, and 5N Multipurpose paper tray (Tray 3)
J2592-61001	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C2990A	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
8120-6302	Power_Cord - 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output
J3265-69001	Print_Server - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J4100-69001	Print_Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors
J2550-69013	Print_Server - EtherTwist 10Base-T LAN interface board
J4106-69001	Print_Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector
92298X	Cartridge - Maximum black toner (EP) cartridge - With 'Micro-Fine' toner - Prints approximately 8, 800 pages
RG5-0966-030CN	PC_Board - DC controller board
C2037-69004	PC_Board - DC controller board
J2591-69001	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
92298A	Cartridge - Black toner (EP) cartridge - With 'Micro-Fine' toner - Prints approximately 6,800 pages
C2929A	Print_Server - Infared transceiver pod - Plugs in empty IR port slot - For wireless interfacing with a IRDA compliant PC or notebook PC
6R904	Cartridge - 98X HI YIELD BLACK TONER
1818-5621	Memory - 16MB SIMM memory module
C2747-69501	Memory - 16MB SIMM memory module
J4100A	Print_Server - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors
J3258-61041	Module - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
92215N	Cable - Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
C3924A	Tray - 250 Sheet Multi-Size Tray - Legal, Letter, Executive and A4
RG5-1086-000CN	PC_Board - Drive board
J4102-69022	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
RG5-2189-080CN	Paper_Output_Unit - Paper output assembly - Belt driven
RG5-2189-000CN	Paper_Output_Unit - Paper output assembly - Belt driven
C3131A	Memory - 2MB, 70nS, 36-bit SIMM memory module - For HP LaserJet 4P, 4+, 4V, 5, 5N, 5M, 5P, 5Si
J2593-69001	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors
C3925A	Tray - Tray Holds 250 sheets of 8.5inch x 11inch letter size paper
0950-2372	Power_Module - Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts
C3146-67901	Memory - 16MB SIMM memory module
RB1-2131-000CN	Guide - Paper guide (Plastic piece with ribs) - Guides paper out of tray 1
6R903	Cartridge - 98A YIELD BLACK TONER
RH7-1301-000CN	Motor - Main motor assembly
RH7-1235-000CN	Fan - Tubeaxial fan duplexer
RH7-1178-000CN	Fan - Tubeaxial exhaust fan
RB1-7883-000CN	Door - Door - On top of printer (Lift-up printer access cover) - This part is no longer available - Order the top cover assembly
RG5-2199-000CN	Tray - Multi-Purpose input tray - Attaches to front door
J2382-69003	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
RB1-2105-030CN	Support - Toner cartridge support - Black plastic bar that attaches above the toner cartridge
C3926A	Tray - HP LaserJet 5, 5M, and 5N A4 paper tray (Tray 2) - Holds 250 sheets of 8.3inch x 11.7inch A4 size paper
C3131-67901	Memory - 2MB, 32-bit SIMM memory module
0950-3169	Power_Module - Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA and Canada)
RB1-2205-000CN	Roller - Pickup roller (oval shaped) - Located in multipurpose paper tray pickup assembly
J2594-69001	Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
RG5-0876-050CN	Gear - Gear cluster (drive train) assembly
0957-2109	Power_Module - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
RG5-0515-000CN	PC_Board - Interconnect board - Includes cable to A/C power module - Connects DC controller and high voltage power supply to Fuser Assembly
RF5-0343-000CN	Pad - Separation pad (Rectangular) - For multipurpose tray input
5188-5673	Power_Supply - Power module (wall mount, MEI-AH ED12007) - Input voltage 230VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Europe and Israel)
C2809A	Adapter - Serial cable adapter - 9-pin (M) to 25-pin (F)
RF1-3815-000CN	Motor - Front motor
8120-2104	Power_Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland)
RG5-0512-070CN	PC_Board - Paper control board - On right side of paper feed assembly
0957-2192	Power_Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel)
RG5-2192-000CN	Guide - Transfer guide assembly - Ribbed paper guide for the high voltage transfer roller (Does NOT include transfer roller)
24540-80010	Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
9100-5176	Power_Module - POWER SUPPLY, 13V/300MA JPN
RF1-3813-000CN	Motor - Stepper motor
RF1-3814-000CN	Motor - Rear motor
8120-4211	Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)
RF5-0349-000CN	Roller - Transfer roller - Goes in paper guide/high voltage contact plate assembly
J2592-69001	Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
RB1-3517-030CN	Roller - Lower pressure roller - Hard rubber roller - Located in Fuser Assembly
RS5-0232-000CN	Gear - Fuser output gear - 23 tooth
RF5-1647-000CN	Shield - Formatter board EMI shield
RH7-4054-020CN	Lamp - Fusing heat lamp (120v, 60Hz)
RH7-4055-020CN	Lamp - Fusing heat lamp (240v, 50Hz)
0957-2197	Power_Module - Wall mount power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A - United States and Canada
RB1-3516-020CN	Roller - Fusing roller - Hollow roller - Heat lamp goes in its core
RF9-1326-000CN	Roller - Upper delivery roller - Shaft with 7 rollers on it
WG8-0291-000CN	Sensor - Photo sensor
8120-1369	Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China)
C2933A	Cable - RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long
RF5-0430-000CN	Stop - Stop plate - For paper width in 250 page universal cassette
RB1-7881-000CN	Cover - Left side cover
RG5-0469-020CN	Guide - Transfer guide assembly - Plate between toner cartridge and Fuser Assembly
RF5-1644-000CN	Cover - Right side cover
RF5-0647-000CN	Guide - Upper delivery guide - On top of paper output assembly
RH7-1197-000CN	Motor - Paper pickup motor
RA2-2233-000CN	Cover - Right cover Small cover on the right side of the duplexer
RG5-0514-000CN	PC_Board - Sensor board - Narrow board w/ sensors
0957-2229	Power_Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide)
0950-3354	Power_Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa)
RA2-2124-000CN	Roller - Paper drive roller (Shaft with four rubber rollers on it) - Mounts in the top center in the switchback area of the duplexer
RA2-2232-000CN	Cover - Left cover - Small cover on the left side of the duplexer
C2950A	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RA2-2231-000CN	Cover - Front cover (L-shaped) - Small cover on front of duplexer with arrow on it
0950-3349	Power_Module - Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for use in Europe and Israel)
J2590-69001	Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
5188-5676	Power_Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan)
0957-2228	Power_Supply - Power module (wall mount) - Input voltage 120VAC, 60Hz - Output voltage 12VDC, 1.25A, 15 watts (USA and Canada)
RA2-2094-000CN	Guide - Upper feed guide - Upper curved paper feed guide
RA2-2072-000CN	Belt - Timing belt
5188-6700	Power_Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord
RA2-2118-000CN	Roller - Paper drive roller (Shaft with four rubber rollers on it) - Mounts in the rear of the switchback area of the duplexer (Rollers extend through cut outs in the rear support frame)
8120-4753	Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan)
RS1-0595-000CN	Gear - Gear/roller - 18 tooth
5063-1256	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RG5-0466-000CN	Sensor - Leading edge registration sensor and PC paper out sensor
RB1-7902-000CN	Latch - MP tray front door latch
RG5-0529-000CN	Cable - Cable assembly
RH7-5071-000CN	Solenoid - Pickup solenoid (SL1) - For the paper cassette paper pickup (feed) roller
RH7-5075-000CN	Solenoid - Pickup solenoid (SL2) - For multipurpose tray pickup roller
5063-1257	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
RG5-0475-060CN	Sensor - Paper exit (Delivery) sensor assembly
RG5-0530-000CN	Cable - Cable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly
RY7-5080-000CN	Sensor - Photo sensor kit - Includes photo sensors PS 1,3,5 and 6
RF1-3811-000CN	Guide - Paper feed guide
RA2-2095-000CN	Guide - Lower guide - Lower curved paper feed guide
RB1-7903-000CN	Holder - Left latch holder - For MP tray/front door - Mounts in the top left corner of the chassis
RB1-7923-000CN	Holder - Right latch holder - For MP tray/front door - Mounts in the top right corner of the chassis
0950-3351	Power_Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
RB1-2226-000CN	Cover - High voltage cover - Plastic 'Pan' for high voltage board
RA2-2237-000CN	Cover - Lower rear cover - Small cover under the switchback area of the duplexer
0950-3352	Power_Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
C3916-40005	Overlay - Control panel overlay (English)
8120-1351	Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei)
RF5-1657-000CN	Guide - Right Cassette Guide (L-Shaped) - Has Hole in Rear for the Power Cord Connector
RS1-0589-000CN	Gear - Roller drive gear - 22 tooth
RS1-0592-000CN	Gear - Reduction gear - 54/29 tooth
RF5-1654-000CN	Cover - SIMM access cover plate - Under the right side cover
RS5-0388-000CN	Gear - Fusing roller drive gear - 42 tooth
RS1-0586-000CN	Gear - Reduction gear - 40/24 teeth
RS1-0590-000CN	Gear - Drive gear - 32 tooth
RS1-0591-000CN	Gear - Reduction gear - 39/22 tooth
RS1-7009-000CN	Pin - Switchback pin - Pivot point of switchback assembly
0950-3350	Power_Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong)
0950-3172	Power_Module - Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia)
RS1-2411-000CN	Spring - Roller holder spring - Provides tension for pinch roller
RB1-2114-000CN	Foot - Rubber foot - Non-slip replacement rubber foot
RB1-7907-000CN	Button - Power switch button (rocker)
RG5-0975-000CN	Cable - Cable assembly - 8-pin (F) connector to both a 16.5cm (6.5in) cable with a 4-pin (F) connector and a 22.5cm (8.9in) cable with a ferrite and a 6-pin (F) connector
RG5-0979-000CN	Cable - Cable assembly
RG5-0980-000CN	Cable - Cable assembly - From DC controller to delivery sensor (PS3)
RG5-0982-000CN	Cable - Cable assembly
RA2-2087-000CN	Link - Deflector linkage
RB1-2080-000CN	Shutter - Laser shutter - Attaches to bottom of laser/scanner assembly
RB1-2133-000CN	Arm - Paper out sensor arm
RB1-2138-000CN	Lever - Top cover interlock lever - Engages switch on paper control board
RB1-2181-000CN	Holder - Guide roller holder (U-shaped) - In center of paper feed assembly
RB1-2182-000CN	Roller - Guide roller - In center of paper feed assembly
RB1-2236-000CN	Guide - Feeder guide - Ribbed (Gray) metal plate at top of printer
RB1-2253-000CN	Roller - Guide roller - Fits on paper guide/high voltage contact plate
RB1-2259-040CN	Holder - Rear paper holder - Attaches to bottom of high voltage cover
RB1-2299-030CN	Roller - Delivery roller - Double roller in paper output assembly
8120-1378	Power_Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
XF9-0410-000CN	Belt - Timing belt
RA2-2112-000CN	Cover - Cable cover - Protects cable on right side of duplexer switchback assembly
RB1-7906-000CN	Base - Base structure - For the power switch actuator assembly - Does NOT include the power switch
RB1-7913-000CN	Guide - Left paper cassette support guide
RB1-7890-000CN	Latch - Rear door latch
RG5-0524-000CN	Cable - Cable assembly - From DC controller to paper control board
RG5-0526-000CN	Cable - Cable assembly - From DC controller to AC power supply
RS1-0587-000CN	Gear - Reduction gear - 24/18 tooth
RS1-0588-000CN	Gear - Reduction gear - 33/20 tooth
RG5-0976-000CN	Cable - Cable assembly - 7-pin (F) connector on each end - 31.1cm (12.3in) long
RB1-2370-020CN	Stop - Stop plate - For paper length in 250 page universal cassette
RB1-3481-020CN	Cover - Cover for gear cluster (Main Drive train) assembly - Attached to the main motor
WG8-5210-000CN	Sensor - Photo sensor
RF1-3806-000CN	Link - Holding tray linkage
RF5-0369-040CN	Holder - Front paper holder - Attaches to bottom of high voltage cover
RB1-2302-000CN	Spring - Delivery roller spring (U-shaped)
RA2-2102-000CN	Roller - Guide roller - Rollers are not spring loaded - Located in front of switchback guide
RA2-2089-000CN	Holder - Roller holder - Pinch roller holder
RA2-2093-000CN	Roller - Pinch roller - Top of switchback guide
RB1-2354-000CN	Strap - Support strap for rear door - Supports door when open
RB1-2366-000CN	Cover - Empty slot cover - For option board - Attaches to the I.O panel
RB1-2615-000CN	Arm - Cassette sensor arm
RB1-2616-000CN	Roller - Guide roller - Mounts in the lower cassette base assembly
RB1-2620-000CN	Foot - Rubber foot - Replacement rubber foot for the bottom of the (optional) lower cassette base
RF5-0425-040CN	Holder - Output roller and holder
RA2-2090-000CN	Deflector - Switchback deflector (Shaft with curved deflector fingers) - Attaches to the rear of the switchback guide (in the top of the duplexer)
RS5-2571-000CN	Spring - Rear door spring - Fits under rear door latch
RF5-1077-030CN	Roller - Lower delivery roller - Shaft with 4 double rollers on it
RG5-0978-000CN	Cable - Cable assembly - From DC controller to main motor
RS5-0231-000CN	Gear - Fuser drive gear - 19 tooth
RG1-3529-000CN	Cable - Sensor cable - From controller PCA to photo sensor PS1
RB1-7888-000CN	Cover - Inner cover plate - Removed when installing envelope feeder
RB1-7889-000CN	Cover - Right front cover assembly - Includes spring loaded font door
RB1-7896-000CN	Rod - Power switch rod - From main switch assembly to power supply
RB1-7911-000CN	Roller - Pickup roller (Quarter circle shaped) - For upper cassette
RB1-7983-000CN	Roller - Pickup roller - Oval shaped
0950-3171	Power_Module - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong)
C3927-69001	Feeder - Power envelope feeder - Holds 75 envelopes
C3916-40006	Overlay - Control panel overlay (French)
C3916-40007	Overlay - Control panel overlay (Italian)
C3920-67901	Duplexer - Duplexer assembly - For two sided printing
C2951A	Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2932A	Cable - RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
C3927A	Feeder - Power envelope feeder - Holds 75 envelopes
RB1-7885-000CN	Tray - Multi-Purpose tray extension
RB1-7886-000CN	Door - MP door - On front panel - Does NOT include tray extension
8120-1689	Power_Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
RA2-2119-000CN	Deflector - Paper deflector assembly (Shaft with curved deflector fingers) - Attaches to the front of the switchback guide (in the top of the duplexer) - Solenoid activated
92215S	Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
8120-2956	Power_Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark)
0957-2134	Power_Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan)
0957-2110	Power_Module - Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA and Canada)
C6072-60301	Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
5090-3379	Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
92296R	Label - LaserJet/DeskJet printer labels - 20.0cm (7.86in) x 28.9cm (11.4in) labels on A4 size (21.0cm x 29.7cm) sheet - One per sheet - 100 sheets per box
RG5-0881-000CN	Thermoswitch - Thermoswitch (fuser temperature switch) - At left of fusing roller
5182-2805	Fuser_Assembly - Fuser Assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains five new fusing assemblies)
RH7-7054-000CN	Thermistor - Thermistor assembly - Includes cable
C3916-67910	Kit - Self paced training kit for LaserJet 4, 4M, 4+, 4M+, 5, 5M, and 5N - Includes service manual, PAL format video (VHS)
C3916-90995	Manual - Additional self paced training test - Contains 5 tests for the LaserJet 5 series - Also covers the LJ 4, 4+, 4M, and 4M+
RA2-2088-000CN	Guide - Switchback guide - Large ribbed piece in the top of the switchback area of the duplexer
RF5-1645-000CN	Door - Rear door assembly - Includes support strap, latch, and spring
RF5-1675-000CN	Stop - Stop plate for paper length in 500 page lower cassette
RA2-2083-000CN	Brush - Static brush
RB1-7887-000CN	Window - Control panel display window/cover
RF1-3808-000CN	Solenoid - Switchback solenoid - Moves paper deflector
C3916-67909	Manual - Self paced training kit for LaserJet 4, 4M, 4+, 4M+, 5, 5M, and 5N - Includes service manual, NTSC format video (VHS)
C3917A-Manual	Service_Guide_PH - HP LaserJet 5M Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
RF5-0747-000CN	Holder - Roller
C3918-67901	PostScript - Adobe's PostScript (level two) SIMM module - Includes 2MB additional memory and 35 adobe typefaces
J3265G	Print_Server - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
RA2-2126-000CN	Brush - Static brush
RB1-2237-020CN	Brush - Brush - Static eliminating
RB1-2627-020CN	Weight - Weight - Clips on to paper pickup drive shaft of the lower cassette base drive assembly
RB1-7895-000CN	Tool - Hook tool - For removing the transfer roller
RS1-2408-000CN	Spring - Switchback tension spring - Provides tension for switchback tray
RS1-2410-000CN	Spring - Deflector spring - Provides tension for duplex paper switchback paper deflector assembly
RS1-2412-000CN	Spring - Deflector spring - Provides tension for switchback deflector at top back of duplexer
RS5-2267-000CN	Spring - Spring - For delivery roller holder in paper output
RG1-3570-000CN	Cover - Upper rear cover assembly - Includes paper reversing tray and latch - Large 'box' structure on the rear of the LaserJet (Covering the switchback area of the duplexer)
0957-2194	Power_Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea)
5184-5211	Cartridge - Black toner (EP) cartridge - With 'Micro-Fine' toner - Prints approximately 6,800 pages
RG5-2186-000CN	Cover - Top cover assembly - Includes hinges, top cover, and top door