News - HP LaserJet M9040 MFP Parts

year

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP LaserJet M9040 MFP Parts

sourcehttp://www.printerparts-hp.com

publisherJacky

time2012/09/12

Part	Description
RG5-6300-070CN	ADF - ADF main assembly
RG5-6300-000CN	ADF - ADF main assembly
CC395-67902	PC_Board - Formatter (main logic) board - For HP Laserjet M9040/M9050 series
RH5-3075-090CN	PC_Board - Scanner control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear
C8523-69011	PC_Board - Scanner Control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear
RG1-4386-020CN	Power_Supply - Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly
C8531-69018	Tray - 2,000-sheet high capacity paper feeder assembly
RG5-6307-020CN	Optical_Unit - ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly
C9152-69007	Maintenance_Kit - Maintenance Kit - For 120 VAC - Replacement Parts after 350k Pages Includes, Fuser Assembly, 7 Feed/Separation Rollers, 2 Pickup Rollers and Transfer roller
C8519-69036	Fuser_Assembly - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat
RG5-7778-030CN	Power_Supply - Low voltage power supply assembly - For 100-127VAC operation - Mounts on the upper rear of the printer
C8519-69035	Fuser_Assembly - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
C8519-69022	Fuser_Assembly - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
RG5-5750-000CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
RM1-7354-000CN	Power_Supply - POWER SUPPLY ASS Y
RG5-7779-030CN	Power_Supply - Low voltage power supply assembly - For 220-240VAC operation - Mounts on the upper rear of the printer
C9153-67907	Maintenance_Kit - Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, Fuser Assembly, seven feed/separation rollers, two pickup rollers and transfer roller
C8519-69033	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
RG5-5750-270CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 100V to 127V Operation
RG5-5684-000CN	Fuser_Assembly - Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat
RG5-5751-270CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220-240V operation
RG5-6275-060CN	Pickup_Assembly - Paper pickup assembly - Includes the pickup structure pieces, motors, gears, belts, rollers and sloenoid (Does NOT include the ADF main assembly) - Mounts on top of the ADF base assembly towards the left end
RG5-5826-090CN	Laser_Scanner - Laser/Scanner assembly - Mounts on the support structure in the print engine frame assembly
RG5-5681-090CN	Pickup_Assembly - Paper input unit - Entire assembly
CC395-60102	Control_Panel - Control panel assembly - Control buttons and display located on top front of printer
Q6005-67901	PC_Board - Copy processor board assembly - Includes the PC board and support carrier frame - Plugs in one of the EIO slots on the printer
RF5-3676-000CN	Glass - Copyboard glass assembly - Mounts in the frame on top of the scanner assembly
RG5-6272-050CN	Cover - ADF base cover assembly - Includes the large bottom rectangular support cover for the ADF assembly with front and rear tray guides, the ADF intermediate PC board, cables, sensors, and hinges
RG5-5663-060CN	Roller - Registration roller assembly
RG5-7780-060CN	PC_Board - DC controller board assembly
RG5-5728-100CN	Power_Supply - High voltage power supply board
0950-4753	Hard_Drive - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height
C8543X	Cartridge - HP Ultra-Precise print cartridge (Smart print cartridge) - Will print approximately 30,000 pages based on a 5% print density
RG5-6208-180CN	Paper_Input_Unit - Paper Input Unit (PIU) - For tray 4
RG5-6235-150CN	PC_Board - Controller PC board
Q3701-60020	PC_Board - Modem PCA - HP LaserJet analog fax accessory 300
Q3701-60014	Fax_Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter board
C8519-69037	Power_Supply - High voltage power supply board - Mounts on the upper rear of the printer
Q3701-60012	PC_Board - Modem PCA - HP LaserJet analog fax accesory 300
RG5-5643-080CN	Delivery - Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans
RG5-5646-070CN	Door - Left door and diverter assembly
RG5-5737-090CN	Cover - Right cover assembly - Includes all components attached to this door
RG5-5656-080CN	Drive_Assembly - Drum feed drive assembly
RG5-6225-100CN	Paper_Path_Module - Vertical registration assembly
RG5-6250-040CN	Power_Supply - Power supply assembly
5851-3833	Hard_Drive - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935.
RG5-7807-000CN	Sensor - Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle
C8519-69015	Power_Supply - High Voltage power supply board - Mounts on the upper rear of the printer
RH7-1622-000CN	Motor - Fuser delivery motor (24 VDC) - Provides power for fuser delivery drive assembly
RH7-1656-000CN	Motor - Drum feed drive motor
RF5-3695-030CN	Cover - Whiteboard cover assembly - White padded sheet mounted on a rectangular support cover - Mounts on the under side of the ADF assembly/scanner lid
Q7718-67951	Memory - 128MB, 100-pin, DDR SDRAM DIMM memory module
RG5-5635-110CN	Tray - 500-sheet paper cassette - Paper cassette used for tray 2 and tray 3
RG5-7789-050CN	Drive_Assembly - Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller
Q6006-67901	PC_Board - Copy connect board assembly - LVDS adapter board used to interface the flatbed scanner to the copy processor board in the printer - Mounts on the rear of the flatbed scanner assembly
RG5-5647-070CN	Delivery - Face-up delivery assembly
RG5-7896-000CN	PC_Board - Paper pickup board
RG5-5719-100CN	PC_Board - Memory controller PC Board - Toner cartridge
RH7-1488-030CN	Motor - Motor (24 VDC) assembly - Drives the paper pickup roller, feed roller, separation belt assembly, and registration rollers - Mounts at an angle in a bracket on the rear frame of the ADF paper pickup assembly
RH7-1487-020CN	Motor - Motor (24 VDC) assembly - Drives the output delivery rollers - Mounts in a bracket about in the center of the rear frame of the ADF paper pickup assembly
RG5-5645-020CN	Delivery - Delivery cross member assembly - Includes the 'L' shaped support bracket with the rear delivery fan (Fan 3), front delivery fan (Fan 4), and face down tray fan (Fan 6)
RG5-6318-030CN	Fan - 24VDC cooling fan assembly - Includes fan, filter and metal grill - Mounts on the rear support frame in the left rear corner of the scanner assembly
Q6006-60001	PC_Board - Copy connect board assembly - LVDS adapter board used to interface the flatbed scanner to the copy processor board in the printer - Mounts on the rear of the flatbed scanner assembly
RH5-3165-030CN	PC_Board - Intermediate PCA board - Located on the scanner assembly
CC501-67913	Memory - CARD-128MB FLASH MEMORY PRGM
RG5-6274-000CN	Sensor - ADF media width sensor assembly (includes the white sensor gear that mates with the rack gear) - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly (behind the copyboard cover assembly)
RG5-5809-060CN	Tray - Multi-purpose Tray - Optional Tray 1 drop down paper input tray assembly only - Includes drop down flip out tray and paper width guides
RG5-5702-050CN	Cover - Front cover assembly - Large door above trays 2 and 3
RB2-5660-000CN	Cover - Top left cover - Face down paper output cover - Located on the left side portion of the top cover
RG5-6315-000CN	Cover - Rear ADF cover assembly - Includes the rear ADF electronics cover and the two hinge covers
RG5-8009-000CN	PC_Board - Cartridge memory controller board - Between ECU and the toner cartridge memory antenna
RG5-7806-030CN	Sensor - Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle
RG5-6228-060CN	Drive_Assembly - Feed drive assembly - Includes the drive motor (M303), support bracket, and the four drive gears - Mounts in the 2,000-sheet paper feeder assembly
RH7-1661-000CN	Fan - Tubeaxial fan
RG5-6281-020CN	Roller - Feed roller assembly - Includes a steel shaft with five rubber rollers, two bushings, a spring, and 'E' clips - Mounts to the left of the paper pickup roller in the bottom of the ADF paper pickup assembly
RG5-6312-030CN	Fan - ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly
RG5-6227-040CN	Paper_Path_Module - Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine
RG5-5724-050CN	Holder - Fuser connector holder assembly
RG5-5741-040CN	Lifter - Cartridge lifter assembly
RB2-8040-000CN	Cover - Top cover assembly - 'U' shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly
RF5-3319-000CN	Roller - Transfer roller - Includes the long black spongy roller, roller shaft, and drive gear - Transfers static charge to the paper
RG5-6283-020CN	Roller - Pickup roller assembly - Includes a steel shaft with a rubber 'D' shaped roller, drive gear, bushings, sesnor flag, and two retaining clips - Mounts in the bottom of the ADF paper pickup assembly
RG5-5701-000CN	Cover - Rear cover assembly
RH7-1657-000CN	Fan - Tubeaxial fan (fan 1) - Provides air to the power supply
RH5-3078-030CN	PC_Board - ADF intermediate PC board - Has for cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear
RG5-5651-030CN	Guide - Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly
RB2-7648-040CN	Cover - Front cover for the 2,000-sheet paper feeder assembly
RG5-5722-030CN	Cable - Main cable harness and holder assembly
RH5-3073-030CN	PC_Board - Flatbed intermediate PC Board - Intermediate Board between the scanner control board (J502) and the flatbed analog processor board (J501) - Mounts in the bottom of the scanner housing (below the copyboard glass)
RB2-5659-000CN	Cover - Top right cover - Located on the right side portion of the top cover
RF5-3645-000CN	Cover - Left cover for the 2,000-sheet paper feeder assembly
RG5-5727-030CN	Receptacle - A/C power input receptacle module and power switch
FH7-7423-000CN	Sensor - Media length sensor - Three optical sensors (PS1, PS2, and PS3) used to sense the document and the length of the media being scanned on the flatbed scanner
RB2-7934-000CN	Cover - Upper front cover - Top of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly
RG5-6316-000CN	Tray - ADF paper output tray - Includes the tray with pull-out extension - Receives scanned pages from the ADF assembly - Mounts on the left side of the ADF/scanner assembly
RG5-6311-000CN	Guide - Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly
RG5-8025-000CN	Cable - Cable assembly - Fuser power cable
RG5-5721-000CN	Cover - Front inside cover - Cover behind front drop down cover
RB2-7933-000CN	Cover - Lower front cover - Bottom of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly
RB2-6007-000CN	Door - Left side door - Left cover that diverter assembly attaches to
RB2-7649-000CN	Cover - Right cover for the 2,000-sheet paper feeder assembly
RG5-7787-000CN	Cable - Upper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer
RG5-6207-060CN	Sensor - Paper size sensing assembly
RB2-5690-000CN	Tray - Face up paper output tray
RH7-1623-000CN	Fan - Controller board tubeaxial fan
RH5-3079-030CN	PC_Board - ADF sensor PC board assembly - Narrow strip PC board with the two document skew sensors, registration sensor, and timing sensor - Mounts on top of the registration guide assembly in the ADF main assembly
RH7-1481-020CN	Motor - Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly
RG5-6305-000CN	Flag - Registration flag and sensor holder assembly - Activates the document registration sensor on the sensor board on top of the registration guide assembly in the ADF main assembly
RG5-5654-000CN	Guide - Transfer roller guide - Mounts to the top of the base structure of the transfer roller assembly
CC395-60139	Other_Parts - Control panel overlay - Snaps on top of the control panel assembly (Simplified Chinese)
RG5-6238-020CN	PC_Board - Paper size PC board
RH2-5456-000CN	Cable - Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly
RG5-6298-000CN	Weight - Weight plate assembly - Solenoid activated plate assembly that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly
RB2-7961-000CN	Roller - Paper pickup roller (Only) - Rubber 'D' shaped roller - Mounts on the paper pickup drive shaft in the bottom of the ADF paper pickup assembly
RG5-3850-000CN	Plate - Front paper reference plate - Front paper limit plate for 2,000-sheet feeder
RB2-7988-000CN	Belt - Separation belt - Gray rubber belt between the separation drive shaft and the stationary shaft - Mounts towards the entrance of the ADF paper pickup assembly (four used)
FH7-7424-000CN	Sensor - Scanner media size sensor - Media width size sensor (PS4) for the flatbed scanner
RB2-5682-000CN	Cover - Lower right front corner cover for tray 2 and 3
RF5-3689-020CN	Flapper - Rear flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the rear separation belts in the ADF assembly
RH7-1658-000CN	Fan - Tubeaxial fan (fan 4) - Mounts on the upper left crossmember on the delivery assembly
RB3-0304-050CN	Caster - Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)
RF5-3688-020CN	Flapper - Front flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the front separation belts in the ADF assembly
RG5-5705-030CN	Cover - Left upper cover - Small cover above left door
RB2-7678-030CN	Caster - Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used)
RH7-1486-020CN	Fan - ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly
RG5-6313-030CN	Guide - Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RH7-5312-020CN	Solenoid - solenoid (24 VDC) assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pickup assembly towards the right
RB2-5684-000CN	Cover - Right rear cover - small cover strip on rear side of right cover assembly
RG5-6304-040CN	Roller - Upper registration roller guide assembly - Includes the steel shaft with four White rollers mounted in a support frame - Mounts in the lower center of the ADF main assembly
RG5-8034-000CN	Cable - Fuser Assembly high voltage cable and connectors
RG5-5700-030CN	Knob - Fuser jam removal knob
FH7-7423-020CN	Other_Parts - SENSOR, DOCUMENT SIZE
RG5-5740-020CN	Latch - Right cover latch handle assembly
RG5-6289-020CN	Solenoid - Solenoid (24 VDC) assembly - Includes the solenoid and lever arm
RB2-8016-000CN	Shaft - Latching shaft - Long square shaft with a latching hook at one end - Used with the free release latch and release handle to secures the ADF main assembly when the unit is in the operating position
RF5-3644-020CN	Cover - Rear center cover for the 2,000-sheet paper feeder assembly
RB2-8054-000CN	Cover - Left side cover - Serves as the mounting bracket for the ADF paper output tray - Mounts on the upper left side of the scanner assembly
RG5-5653-030CN	Holder - Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in
RF5-3674-000CN	Cover - Roller cover - Covers the exit delivery roller on the left side of the scanner assembly
RB2-5687-000CN	Cover - Lower left cover - Smaller plastic piece below left door and diverter assembly
RG5-5715-030CN	Rail - Right rail assembly
RG5-5704-040CN	Latch - Latch mount assembly
RG5-6229-040CN	Sensor - Paper volume sensing assembly
RB2-8048-000CN	Cover - ADF assembly front cover - Mounts on the end of the ADF main assembly structure
RB2-8015-000CN	Handle - Release handle - Used to open the ADF main assembly from the paper pickup assembly to clear paper jams - Slides on the latching shaft in the top left center of the ADF main assembly
RG5-6206-030CN	Switch - Switch assembly - Custom/standard paper switch
RG5-6306-020CN	Flag - Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used)
RG5-5648-020CN	Damper - Left door damper assembly
RB2-7650-000CN	Cover - Right rear cover for the 2,000-sheet paper feeder assembly
RG5-5811-040CN	Cover - Service cover assembly - Cover for pickup and separation rollers
WG8-5624-000CN	Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
RB2-6491-000CN	Cover - Left upper cover - Small piece above left door
RB2-5685-000CN	Cover - Left back cover - Narrow strip covering the left rear corner of the printer
RH7-5306-000CN	Fan - Tubeaxial fan (#5) - Provides air to the cartridge area
RG5-5717-020CN	Contact - Toner cartridge contact assembly
RG5-5706-000CN	Cover - Left upper cover assembly - Small rectangular cover that mounts between the top of the printer and the paper output tray
RG5-6317-000CN	Hinge - Hinge cover assembly - Flexible hinge with four divisions - Mounts on the rear between the ADF assembly and the scanner assembly (two used)
RG5-5779-030CN	Connector - Jetlink connector - Connector between Tray 4 and printer engine
RG5-5746-030CN	Lever - Cartridge release lever assembly
RB2-7651-000CN	Cover - Left rear cover for the 2,000-sheet paper feeder assembly
RB2-8063-000CN	Cover - Right side cover - 'L' shaped rectangular cover for the right end of the scanner assembly
RG5-5714-020CN	Rail - Left lower rail assembly
RB2-5653-000CN	Strap - Restraining strap
RG5-5699-040CN	Sensor - End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches
RF5-3404-000CN	Roller - Separation roller - For tray 1 assembly
RG5-6257-000CN	Cable - Scanner controller ribbon cables (two cable set) - Interconnects the flatbed intermediate PC board (J504 and 502) to the scanner control PC board (J103 and J105) - Mounts towards the front of the scanner assembly
RB2-5676-000CN	Cover - Tray 1 blanking cover
RG5-5713-020CN	Rail - Left upper rail assembly
RG5-8013-000CN	PC_Board - Delivery assembly PC board
RB2-5683-000CN	Cover - Lower left front corner cover for tray 2 and 3 - Includes power button
RB2-7709-020CN	Caster - Caster
WC4-5136-000CN	Switch - Black toner cartridge switch - Detects when black cartridge is in correct position
RB3-1349-000CN	Overlay - Control panel overlay - For 110V application
RB2-5689-000CN	Cover - Lower right cover - Small plastic piece below right door assembly
RG5-6285-020CN	Sensor - Photo-sensor assembly - Includes the sensor and mounting bracket - Paper pickup roller home position sensor - Activated by the sensor flag on the pickup roller assembly - Mounts on the front frame of the ADF paper pickup assembly
RB2-5528-000CN	Link - Connector link - Door ajar flag
RG5-5718-000CN	Rail - Cartridge guide rail - Right side toner cartridge guide rail
RG5-6237-020CN	PC_Board - Paper volume sensor board
RG5-5709-000CN	Mount - Front pressure mount for toner cartridge
RG5-7786-000CN	Cable - Fan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board
CC395-60138	Other_Parts - Control panel overlay - Snaps on top of the control panel assembly (Traditional Chinese)
RG5-6239-020CN	PC_Board - LED board - Small PC board with two LEDs and a connector - For indicating the operating status
RF5-3403-000CN	Roller - Pick-up roller for optional tray 1
RB2-6501-000CN	Overlay - Control panel overlay - Right side (English)
RG5-8038-000CN	Cable - Multi-purpose/tray 1 cable assembly
XA9-0499-000CN	Screw - Screw with captured washer - Used to fasten plastic to metal - M4 X 6mm screw
RB2-5813-000CN	Lever - Custom/standard media size selection switch lever - Mounts on the left side of the 500-sheet paper input tray
RF5-3682-000CN	Guide - Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
XB4-5401-209CN	Screw - Screw - M4 X 8mm long
RB2-7762-020CN	Lever - Paper size switching lever - To adjust paper size in tray (standard or custom size)
RB2-5828-000CN	Handle - Registration guide handle
RB2-5661-000CN	Rod - ON/OFF switch push rod
RB2-8678-000CN	Ferrite_Assembly - Ferrite core assembly - Large 'doughnut' shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board
WC4-5175-000CN	Switch - Micro-switch - Detects when the paper feeder/scanner assembly is open - Mounts in a support bracket on the rear frame of the ADF paper pickup assembly
RB2-5700-000CN	Latch - Front cover latch - Roller latch that holds front cover
RG5-5735-000CN	Cable - Power supply cable - Connects between the scanner power supply board and the print engine power supply module
RB2-5515-000CN	Rail - Front Fusing Rail
RF5-3850-000CN	Filter - ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly
RB2-5516-000CN	Rail - Rear Fusing Rail
RB2-5526-000CN	Guide - Cartridge guide - Plastic structure with cartridge guide slot molded into it - Mounts on the upper front side of the registration assembly
RF5-3698-000CN	Guide - Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly
RG5-5710-000CN	Mount - Rear pressure mount for toner cartridge
RB2-7935-000CN	Mount - Glass mount cover - Small plastic piece that covers the mounting hardware used to retain the copyboard glass - Mounts in the recesses on the scanner assembly upper front cover (two used)
RB2-8060-000CN	Cover - Connector cover - Small rectangular piece that extends out from the back of the scanner assembly (two used)
RG5-7783-000CN	Cable - Fan connecting cable - Mounts on the rear of the printer
RF5-3338-000CN	Roller - Feed separation pick-up roller - Rubber roller on a plastic collar with integrated gear and locking tab
RB2-5640-000CN	Shutter - Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer
RB2-5654-000CN	Hinge - Front cover hinge
RB2-8046-000CN	Guide - Lower front cable guide (I/F 1) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-5570-020CN	Mount - Door dampener hinge mount - Left side/fuser door dampener mount (two used)
RB2-6500-000CN	Control_Panel - Left side control panel overlay - Overlay thet mounts next to the control panel overlay (English)
RB1-6421-000CN	Foot - Chassis foot - Support for right side of printer chassis - Two used
RB2-5522-000CN	Guide - Paper pickup guide - Plastic shaft with several fins on it - Mounts on the upper right side of the print engine frame assembly
RB2-8002-000CN	Flag - Flag lever - Lever half of the sensor flag for detecting when the ADF input tray is empty - Flag part hangs down at the entrance to the ADF paper pickup assembly
RB2-7927-000CN	Clip - Glass mounting alignment clip - Used to properly align the copyboard glass in the scanner assembly cover frame - Mounts in the left rear corner of the frame (one used)
RB2-5523-000CN	Contact - Fuser electrical contact leaf spring
RB2-8017-000CN	Latch - Release latch - Curved plastic latch that slides on the latching shaft - Secures the ADF main assembly when the unit is in the operating position - Mounts on the front of the ADF main assembly
RB2-7943-000CN	Lever - Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used)
RB2-5697-000CN	Cover - Right front inside corner cover
5851-2583	Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA
RB2-5656-000CN	Pin - Pin - Located on the front cover assembly next to the roller action latch
RB2-7978-000CN	Flag - Flag lever - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Activates the sensor on the rear wall of the ADF paper pickup assembly
RG5-5752-000CN	Cable - Control panel cable assembly - Connects between the control panel and the intermediate PC board
RF5-3340-000CN	Roller - Paper pick-up and feed roller assembly - Rubber roller with drive gear
RB2-8681-000CN	Guide - Lower internal cable guide (I/F 5) - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-5529-000CN	Foot - Chassis foot - Support for left side of printer chassis - Two used
RB2-5517-020CN	Mount - Front Fuser Assembly mount
RB2-7928-000CN	Clip - Glass mounting clip - Used to retain the copyboard glass in the scanner assembly cover frame - Mounts in the left front, right front, and right rear corners of the frame (three used)
RB2-7999-000CN	Weight - Weight plate (Only) - Black plastic plate that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly
RS6-2298-020CN	Spring - Tension spring
RB2-8682-000CN	Guide - Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-5845-000CN	Knob - Jam removal knob
XB4-5401-009CN	Screw - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
XA9-1495-000CN	Screw - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
XA9-1500-000CN	Screw - M3 pan-head Phillips screw with flat washer - 8mm long
XB2-6300-607CN	Screw - Screw - M3 X 6mm long
RS6-2299-000CN	Spring - Shutter arm spring - Provides tension for shutter arm
RS6-2302-000CN	Spring - Compression spring - Provides tension for ON/OFF switch
XA9-0912-000CN	Screw - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
XA9-0994-000CN	Screw - Screw - M4 x 6mm long
XA9-1448-000CN	Screw - Screw - M4 X 8mm long
XA9-1466-000CN	Screw - Machine screw with captured washer - M3 X 29.5mm long
RS5-0708-000CN	Gear - 21 tooth gear
RS5-9099-000CN	Screw - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
RS6-2285-000CN	Spring - Tension spring
RS6-2296-000CN	Spring - Laser shutter spring - Provides tension for laser shutter
RH2-5445-000CN	Cable - High voltage power supply ribbon cable
RG5-5764-000CN	Cable - Cable assembly - Grounding cable for tray 1
RG5-5736-000CN	Cable - Grounding cable - Grounding cable for ADF/scanner assembly
RB2-6495-000CN	Clip - Holder clip lock - Secures the ADF/Scanner assembly to the top of printer (four used)
RB2-6035-000CN	Flag - Sensor flag - Long rod with forked flag toward one end and curved flag at the other
RB2-6036-000CN	Flag - Sensor flag - Short rod with two flat flags and a curved end flag
RB2-6037-000CN	Flag - Sensor flag - Short rod with two flags on it
RB2-6042-000CN	Spring - Torsion spring - Provides tension for bin full flag
RB2-6077-000CN	Lever - Microswitch lever - Activates interlock switches from both the front and left doors
RB2-5816-000CN	Spring - Torsion spring - Provides tension for paper selector switch
RB2-7920-000CN	Plate - Ground plate - Small plate with two tangs - Grounds the end of the carriage rod for the scanner optical assembly - Mounts on the right end of the scanner assembly towards the rear
RB2-8693-000CN	Holder - ADF stop holder - White plastic 'T' shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism
RB2-7989-000CN	Spacer - Support spacer - Used to keep the separation belts tight between the drive shaft and the stationary shaft in the separation assembly - Mounts in the ADF paper pickup assembly (three used)
RB2-7990-000CN	Holder - Spring holder - Small Black plastic piece that holds the leaf spring against the stationary shaft in each spacer in the separation assembly - Mounts in the ADF paper pickup assembly (three used)
RB2-7991-000CN	Spring - Leaf spring - Used to lock the spacer between the drive shaft and the stationary shaft in the separation assembly - Mounts in the ADF paper pickup assembly (three used)
RB2-8047-000CN	Guide - Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivioting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly
RB2-5518-020CN	Mount - Rear Fuser Assembly mount
RB2-5547-000CN	Latch - Left side alignment latch for front door
RB2-5639-000CN	Arm - Shutter arm
RB2-5675-000CN	Cap - Right cover cap
RB2-5679-000CN	Plate - Right side lock plate
RB2-8094-000CN	Other_Parts - CLAMP CABLE
RF5-3695-000CN	Cover - Whiteboard cover assembly - White padded sheet mounted on a rectangular support cover - Mounts on the under side of the ADF assembly/scanner lid
0515-4257	Screw - Pan head taptite screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
0515-4679	Screw - M3 pan-head phillips screw with washer - 6mm long
CC394A	LaserJet - HP LaserJet M9040 MFP Printer
H7700E	Care_Pack - HP 3 year Next business day Onsite LaserJet 9040/9050MFP and M9040/M9050MFPHardware Support
U2014E	Care_Pack - HP Network Install high-end LaserJet Multifunction printer Service
U2019E	Care_Pack - HP 3 year 4 hour response 13x5 Onsite LaserJet 9040/9050 and M9040/M9050MFP Hardware Support
U2020PE	Care_Pack - HP 1 year Post Warranty Next business day Onsite LaserJet 9040/9050 and M9040/9050MFP HW Support
U2052PE	Care_Pack - HP 1 year Post Warranty 4 hour response 13x5 Onsite LaserJet90xxMFP and M9040/M9050MFP HW Support
U4928E	Care_Pack - HP 3 year 4 hour response 9x5 Onsite LaserJet 9040/9050 and M9040/M9050MFP Hardware Support
U4932PE	Care_Pack - HP 1 year Post Warranty 4 hour response 9x5 Onsite Designjet 5500 60-inch Hardware Support
U6402PE	Care_Pack - HP 1 year PW 4 hour response 9x5 Onsite LaserJet 9040/9050MFP and M9040/M9050MFP Hardware Support
U9877E	Care_Pack - HP Maintenance Kit Replacement LaserJet 90xx/90xxMFP/M90xxMFP Fuser 110V Service
UK668E	Care_Pack - HP 3 year Next business day Onsite plus Defective media retention LaserJet 9040MFP 9050MFP Support
UK676PE	Care_Pack - HP 1 year PW Next business day Onsite + Defective media retention LaserJetM9040/9050MFP Support
UL624E	Care_Pack - HP Secure Hard Disk Installation and Startup Service
UJ528E	Care_Pack - HP 4 year Next business day Onsite LaserJet M9040/9050MFP Hardware Support
UJ568E	Care_Pack - HP 5 year Next business day Onsite LaserJet M9040/9050MFP Hardware Support
UJ569E	Care_Pack - HP 4 year 4 hour response 9x5 Onsite LaserJet M9040/9050MFP Hardware Support
UJ570E	Care_Pack - HP 4 year 4 hour response 13x5 Onsite LaserJet M9040/9050MFP Hardware Support
UJ571E	Care_Pack - HP 5 year 4 hour response 9x5 Onsite LaserJet M9040/9050MFP Hardware Support
UJ572E	Care_Pack - HP 5 year 4 hour response 13x5 Onsite LaserJet M9040/9050MFP Hardware Support
UT813PE	Care_Pack - HP 2 year Post-Warranty Next business day onsite LaserJet 9xx M90xx MFP Hardware Support
UT986E	Care_Pack - HP 4 year Next business day Onsite + Defective Media Retention LaserJet M9040 M9050 MFP Support
UU851E	Care_Pack - HP 5 year Next business day Onsite + Defective Media Retention LaserJet M9040/9050 MFP Support
UU927PE	Care_Pack - HP 1 year Post Warranty Phone Assist High-end Multifunction LaserJet printer Service
Q7718-67901	Memory - 128MB, 100-pin, DDR DIMM memory module
Q7719-67901	Memory - 256MB, 100-pin, DDR DIMM memory module
RG1-4153-130CN	Power_Supply - Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly
C8531-67908	Tray - Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly
CC395-60103	Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)
CC395-60104	Overlay - Control panel overlay - Snaps on top of the control panel assembly (French)
CC395-60105	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Italian)
CC395-60106	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Dutch)
CC395-60107	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Spanish)
CC395-60108	Overlay - Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands)
CC395-60109	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Portuguese)
CC395-60110	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Norwegian)
CC395-60111	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Swedish)
CC395-60112	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Finnish)
CC395-60113	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Danish)
CC395-60114	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Polish)
CC395-60115	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Russian)
CC395-60116	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Czech)
CC395-60117	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hungarian)
CC395-60118	Overlay - Control panel overlay - Snaps on top of the control panel assembly (traditional Chinese)
CC395-60119	Overlay - Control panel overlay - Snaps on top of the control panel assembly (simplified Chinese)
CC395-60120	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Korean)
CC395-60121	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Japanese)
CC395-60122	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Turkish)
CC395-60123	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hebrew)
CC395-60124	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Greek)
CC395-60125	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Arabic)
CC395-60126	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Thai)
CC395-60127	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Croatian)
CC395-60128	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Romanian)
CC395-60129	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovak)
CC395-60130	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovenian)
CC395-60135	Overlay - Control panel overlay - Snaps on top of the control panel assembly (Catalan)