News - HP Color LaserJet CM6040f MFP Parts

year

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP Color LaserJet CM6040f MFP Parts

sourcehttp://www.printerparts-hp.com

publisherJacky

time2012/10/13

Part	Description
Q3938-60132	Scanner - Entire scanner - Does not include power supply, boards, and cable
CE664-69004	Scanner_Assembly - Scanner assembly - Does not include power supply, boards, and cable
Q3938-60161	Scanner_Assembly - Entire scanner - Does not include power supply, boards, and cable
Q3931-67935	Fixing_Assembly - 110-127V FIXING ASS Y Kit Part Number
Q3931-67935	Fixing_Assembly - 110-127V FIXING ASS Y Kit Part Number
Q3931-67914	Fuser_Assembly - Fuser Assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat.
Q3931-67915	Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bones toner to the paper with heat
Q3938-67901	Carriage - Carriage assembly - Holds and positions print cartridges
Q3931-67927	Fuser_Assembly - Fussing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat
RM1-3244-000CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation
Q3938-67960	PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 series
RM1-3307-040CN	Belt - Intermediate transfer belt (ITB) assembly
RM1-3242-000CN	Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation
Q3938-67977	PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 series
Q3938-67973	Carriage - Carriage assembly - Holds and positions print cartridges
Q7719-67951	Memory - HP 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
Q7720-67951	Memory - HP 512MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
RM2-0190-000CN	Power_Supply - Low voltage power supply ass y
RM1-3594-000CN	Power_Supply - Low voltage power supply assembly
RM1-4139-000CN	PC_Board - Main controller PCA assembly - For the stapler/stacker and booklet maker unit
RM1-4178-000CN	Saddle - Saddle stapler assembly
Q3931-67902	Memory - 128MB, 167MHZ, 200-pin DDR DIMM memory module
RM1-4101-000CN	Tray - Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1)
Q3931-67907	Scanner_Assembly - Laser/scanner assembly kit
CC516-69002	Transport_Module - Intermediate paper transport unit (IPTU) (whole unit)
RM1-4102-000CN	Tray - Upper stack tray assembly (output bin 1) - For the booklet maker unit
CB380-67901	Drum - HP CLJ Blk Print Cartridge
CB386-67901	Drum - Hp color laserjet yellow image drum
CB387-67901	Drum - Hp color laserjet magenta image drum
4G3-0670-000CN	Mount - Motor mount assembly
CB385-67901	Drum - Hp color laserjet cyan image drum
Q3938-67965	Transfer_Kit - Image Transfer Kit 150K
RM1-3307-000CN	Belt - Intermediate transfer belt (ITB) assembly
CB381-67901	Cartridge - Cyan print toner cartridge - For the Color LaserJet CP6015 series
CB382-67901	Cartridge - Yellow print toner cartridge - For the Color LaserJet CP6015 series
CB383-67901	Cartridge - Magenta print toner cartridge - For the Color LaserJet CP6015 series
RM1-6642-000CN	PC_Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
RM1-6642-040CN	PC_Board - Replacement for part RM1-6642-000CN DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
RM1-6642-090CN	PC_Board - Assembly-DC Controller PCB R1.84
RM1-6642-080CN	PC_Board - Assembly-DC Controller PCB R1.84
Q3938-67963	Panel - Control panel assembly - Control buttons and display located on top front of printer
Q3938-67910	Power_Supply - Power supply assembly
Q3931-67911	Drive_Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly
RM1-6642-060CN	DC_Controller - Dc controller pcb ass'y
RM1-6642-050CN	PC_Board - DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board
CB387A	Drum - Hp color laserjet magenta image drum 824a
CB385A	Drum - Hp color laserjet cyan image drum 824a
CB386A	Drum - Hp color laserjet yellow image drum 824a
RM1-4105-000CN	Tray - Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series
Q3938-67902	PC_Board - Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner
FM2-0721-000CN	Stacker_Assembly - Staple assembly - For stapler/stacker and booklet-maker unit
RM1-4140-000CN	PC_Board - Saddle controller PCA assembly
FL2-0846-000CN	Stacker_Assembly - Stapler unit - Located on the saddle stapler assembly
CB463A	Transfer_Kit - HP Color LaserJet Transfer Kit. CP6015/CM6030/CM6040 TRNFR Kit prints approximately 150, 000 pages
RM1-4395-000CN	Guide - Intermediate upper feed guide assembly
Q3931-67912	Drive_Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the cyan and black cartridges
Q3701-60020	PC_Board - Modem PCA - HP LaserJet analog fax accessory 300
Q3701-60014	Fax_Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter board
FM2-0722-000CN	Stapler - Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount
RM1-4109-000CN	Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker
RM1-3652-000CN	Reversing_Unit - Reversing assembly for duplexer assembly
Q3931-67913	Drive_Assembly - Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges
CB380A	Drum - Hp color laserjet black print cartridge 823a
RM1-4136-000CN	Feeder - Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker
RM1-3686-000CN	Guide - Intermediate lowerr feed guide assembly
CB384-67901	Cartridge - Black print toner cartridge - For the Color LaserJet CP6015 series
RM1-3333-000CN	Door - Right door sub assembly
RM1-4125-000CN	Tray - Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242)
RM1-3293-000CN	Delivery - Face down paper delivery assembly
Q3938-67978	Hard_Drive - Hard drive - High performance EIO serial ATA hard drive
RM1-3665-000CN	Feeder - Duplexing feed assembly
Q3931-67918	Tray - 500-sheet paper input tray cassette - For use with tray 2
Q3938-67961	Hard_Drive - Hard drive - High performance EIO serial ATA hard drive
Q7718-67951	Memory - 128MB, 100-pin, DDR SDRAM DIMM memory module
Q3931-67923	Tray - 500-sheet paper input tray cassette - For use with Tray 3, 4, or 5
Q3931-67919	Roller - Paper pick-up roller and retard roller kit - Includes one pick-up roller, one retard roller, and two paper feed rollers - Use with tray 2,3,4, and 5
Q3931-67938	Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3529-000CN	Tray - 1 x 500-sheet input tray cassette
RM1-3218-000CN	Power_Supply - Fuser power supply assembly
RM1-5475-000CN	PC_Board - High voltage transfer \|B\| PCA assembly
RM1-3582-000CN	PC_Board - High voltage transfer \|A\| PCA assembly
RM1-4119-000CN	Cover - Middle height cover assembly for the booklet maker unit
4G3-0671-000CN	Plate - Inner side plate assembly - Used on the booklet market series only
RM1-4408-000CN	Cover - Rear cover assembly - Plastic cover that protects the rear air duct
RM1-3206-000CN	Pickup_Assembly - Paper cassette pick-up assembly - Includes 1 pick roller and 2 feed rollers
RM1-3533-000CN	Pickup_Assembly - 1 x 500-sheet input tray paper pick-up assembly
Q3938-67969	Maintenance_Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly
Q3938-67944	Maintenance_Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly
RM1-3345-000CN	Pickup_Assembly - Multi-purpose/tray 1 paper pick-up assembly
RM1-3357-000CN	Cover - Front cover assembly - Plastic cover that protects the front door assembly
FM2-0730-000CN	Pressure_Assembly - Pressure roller assembly - For the stapler/stacker and booklet-maker
Q3938-67964	Tray - Duplex switchback tray
RM1-3569-000CN	PC_Board - 1 x 500-sheet input tray paper feed PCA assembly
RM1-4108-000CN	Guide - Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm
RM1-3585-000CN	PC_Board - Memory tag PCA assembly
RC2-1278-000CN	Cover - Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit
RM1-3222-020CN	Lifter - Lifter-drive-assembly
RM1-4172-000CN	Guide - Entrance upper guide assembly - For the stapler/stacker and booklet maker unit
4G3-0769-000CN	Motor - Ejection stack motor (M32) assembly
RM1-4130-000CN	Delivery - Saddle paper delivery assembly
FM2-0756-000CN	Guide - Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker
RC1-9871-000CN	Cover - 1 x 500-sheet paper input tray rear cover
RM1-4135-000CN	Guide - Lower height guide assembly
FM2-1409-000CN	Motor - Press motor (M36) assembly
4G1-2283-000CN	Cable - Cable, saddle unit
RM1-4104-000CN	Tray - Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray
RM1-4404-000CN	Cover - Internal front door cover assembly - Plastic cover located behind the front door assembly
RM1-3683-000CN	Cover - Lower left side cover assembly - Located on the intermediate feed main body
RM1-3232-000CN	Case - Thermopile case assembly
4A3-1783-000CN	Roller - Roller, folding
RL1-1477-000CN	Cover - Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only
CB459A	Roller - 2nd transfer roller assembly - For the laserjet CP6015 and CM6030/6040 series
RM1-3366-010CN	Drive_Assembly - Drive assembly - For use with multi-purpose/tray 1
RM1-4399-000CN	Guide - Rear guide reader assembly
RM1-3341-000CN	Tray - Multi-purpose/tray 1 drop down door paper input tray assembly
RM1-4121-000CN	Door - Upper cover assembly - Top door located on the stapler/stacker assembly
RM1-4519-000CN	Motor - Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller
Q3938-67959	Roller - Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5
RM1-3253-000CN	Cage - Formatter board cage assembly - Metal shield and enclosure for the formatter board
FM2-0737-000CN	Motor - Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount
RL1-1210-000CN	Cover - Rear cover - Plastic cover that protects the rear part of the printer
FG3-2887-000CN	PC_Board - Tray driver PCA assembly
RM1-4123-000CN	Cover - Inner cover assembly - Inner cover located on the left side of the finisher main body
RC2-1351-000CN	Cover - Lower internal cover (stapler/stacker only)
Q3931-67905	Cover - Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed
RM1-4131-000CN	Guide - Upper delivery guide assembly - For the saddle assembly
RM1-3537-000CN	Door - 3 x 500-sheet paper input tray right door assembly
RC1-9336-000CN	Cover - Left cover assembly - Plastic cover that protects the left side of the printer
FG3-2892-000CN	Cable - Cable, solenoid
RM1-4110-000CN	Guide - Lower entrance guide assembly - Located on the saddle paper feeder assembly
RC1-9872-000CN	Cover - 1 x 500-sheet paper input tray left cover
RC1-9351-000CN	Cover - Paper delivery cover
RM1-3247-020CN	Gear - Fuser one way gear assembly
RM1-4129-000CN	Cover - Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker
RC1-9350-000CN	Cover - Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer
RC1-9896-000CN	Caster - Double lock front caster - For the 1 x 500-sheet paper input tray
RC1-9921-000CN	Door - Stock door - For 1 x 500-sheet paper input tray
4G3-0725-000CN	Guide - Motor guide assembly - Located on the saddle assembly - For motor (M3)
Q3931-67920	Roller - Paper pick-up retard roller - Used for tray 1
RM1-4397-000CN	Hardware - Right assist assembly
RM1-3238-000CN	Plate - Cyan partition plate assembly
RM1-4396-000CN	Hardware - Left assist assembly
RM1-3235-000CN	Plate - Yellow partition plate assembly
RC1-9874-000CN	Cover - 1 x 500-sheet paper input tray lower right cover
RM1-3233-000CN	Cover - Left side wall cover assembly
4H3-0370-000CN	Clutch - Electromagnetic shutter clutch (CL31) connector (J1046)
RM1-3564-000CN	Cable - Motor cable - For media feed stepping DC motor (M201)
RL1-1272-000CN	Arm - Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU)
RM1-3563-000CN	Cable - Motor cable - For media feed stepping DC motor (M202)
RC1-9666-000CN	Cover - Back cover - Located on top of the shield plate on the intermediante feed main body
RM1-3354-000CN	Plate - Rear mount cover plate assembly
RC1-9882-000CN	Stopper - Stopper, right door
RK2-1366-000CN	Motor - Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly
RM1-3237-000CN	Plate - Magenta partition plate assembly
RM1-3291-000CN	Guide - Multi-purpose/tray 1 guide assembly
RM1-3612-000CN	Cable - Fixing joint cable
4G3-0934-000CN	Sensor - Paper face sensor assembly
RU5-6035-000CN	Guide - Tray roller guide - Located on the output bin 1
RM1-0037-020CN	Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder
RC2-1283-000CN	Panel - Upper height panel - Located on the stapler/stacker unit
RC1-9695-000CN	Plate - Assist arm cap plate - Located on the upper guide assembly
Q7829-67903	Motor - PCA motor assembly
RL1-1280-000CN	Cover - Right lower cover assembly
RM1-4107-000CN	Sensor - Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body
RM1-3618-000CN	Cable - Rear lower cable
RM1-3364-000CN	Fan - Exhaust fan assembly - Cools the fuser area
RM1-3538-000CN	Door - 1 x 500-sheet paper input tray right door assembly
RC1-9917-000CN	Caster - Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly
FL2-0821-000CN	Solenoid - Solenoid (SL34) - Buffer rear end holding solenoid drive signal
4K1-1103-000CN	Motor - Stepping motor (M5) connector (J113)
4G3-1777-000CN	Cable - Staple connecting cable assembly
FM2-0763-000CN	Sensor - Rear end sensor assembly
FC5-5436-000CN	Rail - Rail rack - Mounts on the finisher main body - Four used
RL1-1311-000CN	Rail - Paper cassette tray left rail
Q7829-67909	Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning
RM1-3570-000CN	Sensor - Option paper sensor PCA assembly
RM1-3252-000CN	Holder - Main switch (SW11) holder assembly
RC1-8519-000CN	Torque_Limiter - Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly
XF2-1608-840CN	Belt - Timing belt - Located on the return roller assembly
RC1-9883-000CN	Lever - Lock lever - This is the rear cover lock for the 1 x 500-sheet paper input tray
RM1-3610-000CN	Cable - DC controller board power cable
RM1-3230-000CN	Holder - Transfer contact holder assembly
RC1-9900-000CN	Support - Lock shaft support - Located on the 1 x 500-sheet paper input tray
4S3-2117-000CN	Spring - Tension spring - Provides tension to the front pressure plate (big spring)
4G1-2285-000CN	Cable - Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242)
RC2-1315-000CN	Caster - Caster - Used on pedestal assembly (universal)
RM1-3340-000CN	Tray - Face down end tray assembly
RL1-1284-000CN	Cover - Top cover assembly - Protects the top part of the main printer chassis
FM2-0720-000CN	Mount - Flexible cable mount assembly
FM2-1708-000CN	Sensor - Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket
RL1-1310-000CN	Rail - Right cassette rail - For the 1 x 500-sheet paper input tray
RM1-4394-000CN	Fan - Chassis fan assembly - Located on the intermediate feed main body - Includes fan and plastic fan bracket (FM8)
RC1-9873-000CN	Cover - 1 x 500-sheet paper input tray upper front cover
4G3-0210-000CN	Lock - Upper cover lock assembly
4S3-0171-000CN	Gear - 50-tooth gear - Located on the saddle assembly
FM2-1417-000CN	Sensor - Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle
RK2-1382-000CN	Fan - Delivery unit cooling fan (FM7)
RC2-1284-000CN	Guide - Side wall guide - Mounts on the upper height panel on the booklet maker unit
RM1-3682-000CN	Gear - Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assembly
RC1-8526-000CN	Guide - Multi-purpose/tray 1 upper guide
RM1-4398-000CN	Guide - Front guide reader assembly
RM1-3620-000CN	Cable - Scanner joint cable
RM1-4411-000CN	Arm - T2 guide arm assembly
Q7829-67917	ADF - ADF float assembly
RM1-3617-000CN	Cable - Front cable
RM1-3619-000CN	Cable - Rear upper cable
XF2-3837-340CN	Belt - Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly
RC1-9206-000CN	Rail - Rear reverse scanner rail
RM1-3254-000CN	Holder - Cartridge contact holder assembly
Q3938-67952	Hinge - ADF hinge assembly - For the top cover on the scanner (document lid)
RK2-2376-000CN	Sensor - Sensor unit, humidity
RL1-1335-000CN	Guide - Guide, duplexing feed, upper
FM2-0710-000CN	Switch - Approach switch assembly - Includes approach switch plate and microswitch (MS33)
FM2-1423-000CN	Shaft - Swing press shaft assembly
FM2-0707-000CN	Sensor - Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate
RC2-1347-000CN	Cover - Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit
FB3-7928-020CN	Deflector - Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RC1-9706-000CN	Cover - Right cover assist - Located on the lower guide assembly
RL1-1283-000CN	Guide - Multi-purpose/tray 1 right guide assembly
RM1-3239-000CN	Cover - Right side wall cover assembly
RL1-1322-000CN	Cover - 1 x 500-sheet paper input tray right front cover
RC1-8959-000CN	Guide - Guide, face-down inner
RL1-1321-000CN	Cover - 3 x 500-sheet paper input tray right front cover
RC1-9511-000CN	Cover - Cover, motor
RC1-9278-000CN	Holder - Fuser fan holder - Holds fan (FM2)
RC1-9344-000CN	Cover - Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors
RM1-3216-000CN	Holder - Intermediate transfer belt (ITB) gear holder assembly
FC5-3657-000CN	Torque_Limiter - Torque limiter - Torque limiter for the swing press shaft
RK2-1331-000CN	Motor - Stepping motor - Main drive motor for the printer - Motor M1
RM1-4415-000CN	Cover - Rear right cover assembly
FM2-1639-000CN	Mount - Delivery switch mount assembly
RL1-1289-000CN	Roller - Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray
RM1-4392-000CN	Roller - Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque
FB5-2697-000CN	Deflector - Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate
RM1-4128-000CN	Mount - Lattice cable mount assembly
RM1-4407-000CN	Guide - Paper delivery guide assembly
RM1-4409-000CN	Cable - Fuser bias cable assembly
4S3-1050-000CN	Bearing - Ball bearing (6902ZZNR)
RK2-1377-000CN	Fan - Cooling fan - Provides air to the print cartridge and imaging drum area
RC1-9705-000CN	Cover - Left cover assist - Located on the lower guide assembly
FM2-0709-000CN	Holder - Area sensor holder assembly
RC2-1280-000CN	Cover - Lower left cover - Mounts on the saddle tray assembly
Q3931-67925	Lock - Security lock adapter kit
RK2-1378-000CN	Fan - Fuser cooling fan (FM2) - Provides air to the fuser area
4G3-0271-000CN	Link - Slide link assembly - Located on the top door assembly (upper cover)
4S3-2116-000CN	Spring - Tension spring - Provides tension to the front pressure plate (small spring)
4G1-1498-000CN	Sensor - Area sensor PCA assembly - Located on the area sensor holder assembly
RC1-9884-000CN	Door - 1 x 500-sheet paper input tray tape door
FG3-2903-000CN	Cable - Cable, operation tray
RK2-1356-000CN	Cable - Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector
RM1-3561-000CN	Cable - Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly
RC1-9881-000CN	Guide - 1 x 500-sheet input tray paper feed roller guide
RM1-3225-000CN	Grip - Front grip support assembly
RM1-3226-000CN	Grip - Rear grip support assembly
RM1-5950-000CN	Cover - Fuser fan cover assembly - Plastic cover located next to the rear cover assembly
FU5-0454-000CN	Gear - 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher
RM1-4401-000CN	Duct - Intermediate transfer belt (ITB) duct assembly
RK2-1370-000CN	Motor - Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly
FC5-4221-000CN	Guide - Tray roller guide - Mounts on the front side tray plate
RL1-1215-000CN	Rail - Right cassette rail - For the 1 x 500-sheet paper input tray
RC1-9276-000CN	Duct - Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area
RC1-9912-000CN	Shaft - Lock shaft - For the 1 x 500-sheet paper input tray
RC1-9318-000CN	Cable - Guide, cable, e
RC1-9277-000CN	Holder - Cartridge fan holder - Holds fan (FM3)
RM1-3391-000CN	Cable - Face-down unit 2 cable
RM1-4141-000CN	PC_Board - LED PCA assembly - Located on the stapler/stacker unit rear cover
RM1-4402-000CN	Holder - Tag PCA holder assembly
RM1-3599-000CN	Cable - MFP AC cable - Has connector J3005 on one side and J301 on the other
RC1-9309-000CN	Duct - Scanner fan duct - Directs air into scanner area
RL1-1213-000CN	Rail - Left top rail - For the 1 x 500-sheet paper input tray
4A3-1779-000CN	Plate - Rotation plate - Located next to the dowel pin on the saddle assembly
RM1-4391-000CN	Flag - Face down full flag assembly
RL1-1206-000CN	Roller - Pick-up roller - Located on the on the paper pick-up plate assembly
RM1-3571-000CN	Cable - Paper pick-up option drawer cable
RC1-9308-000CN	Cable - Guide, cable, c
RM1-3623-000CN	Cable - Interface joint cable
RC1-9607-000CN	Guide - Hold guide plate - Located on the left side of the lower guide assembly
RC1-9703-000CN	Plate - Rear mount cover plate assembly
FM2-1401-000CN	Sensor - Shutter sensor assembly
4G3-1624-000CN	Sensor - Paper face sensing assembly - Located on the upper height panel
RC1-9915-000CN	Bushing - Bushing - Mounts on the lock shaft next to the arm lock on the 1 x 500-sheet paper input tray
4A3-1955-000CN	Plate - Grounding plate - Used only for booklet maker series
WG8-5696-000CN	Sensor - Photo-interrupter sensor assembly (Does not include the sensor flag)
RM1-4400-000CN	Guide - Guide sensor assembly - For fuser open cover detection sensor (SR34)
FB3-7881-000CN	Knob - Knob - Mounts on the lower internal cover on the left side of the saddle assembly
RM1-3624-000CN	Cable - Color plane registration joint cable
FC5-6978-000CN	Plate - Plate, option tray, front
RC1-8527-000CN	Cover - Multi-purpose/tray 1 blanking cover
RC1-9211-000CN	Cover - Cover, main switch
RM1-3560-000CN	Cable - Drawer cable - Locaten on the fin lock assembly in the intermediate feed main body
RC1-8961-000CN	Duct - Air duct - Deflects air from fan FM7
XF9-0748-000CN	Belt - Timing cogged belt - Located on the front side plate on the finisher main body
RC1-9043-000CN	Door - Band, door
RG5-1928-000CN	Cable - Registration cable assembly - Includes 7P and 3P connectors
RC1-9334-000CN	Duct - Duct, scanner
RK2-1354-000CN	Cable - Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector
RM1-5953-000CN	Cover - Front internal small cover assembly - Located on the upper right side of the front door assembly
RM1-5030-000CN	Cable - Cable, tp/t2 open sensor
RC1-9649-000CN	Cover - Blanking cover - Located next to the four bushings on the drive frame
RM1-3573-000CN	Cable - Pick-up option PCA connect cable
RM1-3217-000CN	Cable - Fixing motor cable
RM1-3622-000CN	Cable - Panel joint cable
FC5-5004-000CN	Sensor - Paper sensing sensor flag - Mounts on the lower height panel
RC1-9307-000CN	Cable - Guide, cable, b
RC1-8928-000CN	Lever - Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly
FU5-0457-000CN	Gear - 17-tooth gear - Attaches to the rear tray side plate
RC2-1279-000CN	Cover - Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit
VS1-7257-012CN	Connector - Drawer Connector (J1903) - For the 1 x 500-sheet input tray
RC1-8511-000CN	Retainer - Retainer (C Type) for Color LaserJet CP6015n.
FU5-1169-000CN	Bushing - Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly
FC5-5024-000CN	Knob - Latch knob - Mounts on the open/close guide on the saddle guide assembly
FS6-0829-000CN	Gear - 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm
RC1-9190-000CN	Plate - Plate, fan fixing, front
RM1-3574-000CN	Cable - Option sensor PCA connect cable
FU5-9059-000CN	Screw - M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal
RM1-3389-000CN	Cable - Control Panel cable
XF2-1607-860CN	Belt - Timing cogged belt - Runs on ejection stack motor assembly (M32)
FM2-0718-000CN	Flag - Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper
Q7829-67914	Sensor - ADF photo interrupter sensor with connector
RC1-9186-000CN	Guide - Intermediate transfer belt (ITB) rear entrance guide
RC1-9306-000CN	Cable - Guide, cable, a
RC1-9332-000CN	Guide - Fuser cable guide - Located on the fuser power supply assembly
FB3-7934-000CN	Rack_Slide - Rear rack slide - Mounts on the rear saddle side plate
FB3-7967-000CN	Rack_Slide - Front rack slide - Mounts on the front saddle side plate
RM1-3385-000CN	Cable - Toner feed motor (M16) cable
RC1-9246-000CN	Plate - Front sensor plate - For sensor (SR32)
RM1-3576-000CN	Cable - Pick-up option lifter unit cable
5851-2501	Cable - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board
FU5-0435-000CN	Gear - 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member
RC1-9312-000CN	Cable - Guide, cable, d
WC2-5512-000CN	Switch - Detection switch
4A3-1763-000CN	Arm - Front adjustment arm - Located on the folding roller on the saddle assembly
4A3-1764-000CN	Arm - Rear adjustment arm - Located on the folding roller on the saddle assembly
FS5-3576-000CN	Gear - 30-tooth gear
RC1-9688-000CN	Guide - Cable guide - Located next to the paper feed cogged belt on the intermediate feed main body
4A3-1782-000CN	Stop - Lever stopper
RU5-0790-000CN	Gear - 83/25-tooth gear - Mounts on the fuser motor plate
RC1-9913-000CN	Arm - Lock arm - For the 1 x 500-sheet paper input tray - Mounts on the lock shaft
FU5-2399-000CN	Gear - 29-tooth gear - Runs on the paper feeder motor assembly
FS5-3577-000CN	Pulley - 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag
RC1-9326-000CN	Plate - HVT-A (high-voltage transmission) guard plate
RC1-8931-000CN	Rail - Rail, fixing, front
RC1-9360-000CN	Cover - Cover, face-down drive
RC1-9256-000CN	Tray - Screw tray - Attaches next ot the cable guide E
RC2-1356-000CN	Ground - Grounding plate - Located on the rear left side of the saddle assembly
RC2-1734-000CN	LED - LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit
FS6-0830-000CN	Gear - 16-tooth gear - Runs on the folding roller next to the front adjustment arm
FU5-3086-000CN	Pulley - 20-tooth pulley
RM1-3630-000CN	Cable - Multi-purpose/tray 1 cable
RU5-0868-000CN	Gear - 22-tooth gear - Small gear that runs on the paper-feed cogged belt
FS6-0822-000CN	Gear - 16/33-tooth gear - Runs on the shaft located under the folding roller
RM1-3383-000CN	Cable - Toner feed motor (M17) cable
RC1-9220-000CN	Lever - Lever, door interlock shutter
RC1-9235-000CN	Plate - Plate, drawer guard
RC1-9300-000CN	Button - Button, main switch
RC1-9324-000CN	Holder - Environment sensor holder - Holds the humidity sensor unit
XD9-0234-000CN	Clip - E-Type retainer ring
FB3-7980-000CN	Spring - Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate
FU5-0428-000CN	Gear - 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley
FS6-0815-000CN	Gear - 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5)
FS6-2582-000CN	Spring - Tension spring - Provides tension to the pressure plate assembly
FS6-0823-000CN	Gear - 16-tooth gear - Runs on the shaft located under the folding roller
FC5-5542-000CN	Guide - Entrance sheet guide - Mounts on the cross member entrance guide
FB3-7925-030CN	Flag - Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly
FB3-7973-000CN	Holder - Roller holder 2 - For the cam shaft
RM1-3575-000CN	Cable - Paper pick-up option cable - Used for the 1 x 500-sheet input tray
XA9-1495-000CN	Screw - Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal
XA9-0912-000CN	Screw - Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal
XA9-1386-000CN	Screw - M3 X 8mm long self threading screw with captured washer
XA9-1422-000CN	Screw - M4 X 12mm machine screw with washer
XA9-1448-000CN	Screw - Screw - M4 X 8mm long
XA9-1449-000CN	Screw - M3 pan-head Phillips screw with machine threads - 8mm long
XA9-1469-000CN	Hardware - Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal
FC5-5021-000CN	Latch - Right latch claw
RC1-9687-000CN	Hardware - Blanking sheet - Mounts on the shield plate
XA9-1500-000CN	Screw - M3 pan-head Phillips screw with flat washer - 8mm long
XD2-3100-152CN	Ring - C-type external retainer ring
XD3-2300-142CN	Pin - Dowel pin - Located next to the 17-tooth gear on the output bin 2
XD3-2300-202CN	Pin - Dowel pin - Locate next to the 50-tooth gear
RC1-9244-000CN	Spring - Torsion spring - Provides torsion to the front fuser fan plate
RC1-9231-000CN	Rail - Roller, rail
RC1-9233-000CN	Spring - Spring, leaf
RC1-8939-000CN	Rail - Rail, fixing, rear
RC1-9208-000CN	Foot - Chassis rubber foot
RC1-9901-000CN	Plate - Switch cover plate - For the 1 x 500-sheet paper input tray door open detection switch (SW103)
RC1-9328-000CN	Holder - High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover
RM1-3572-000CN	Cable - Pick-up option door switch cable
FB3-7979-000CN	Flag - Flag sensor - Located on the rear saddle side plate
FB5-5937-020CN	Flag - Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate
FC5-5005-000CN	Spring - Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel
4A3-4715-000CN	Plate - Stop hinge plate - Used only for booklet maker series
RM1-5029-000CN	Cable - Cable, fixing open sensor
XB4-7401-005CN	Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates
XB4-7401-006CN	Screw - M4x10 tapping pan-head screw
XB6-7303-005CN	Screw - Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic
WT2-5694-000CN	Clamp - Snap-in cable clamp
WT2-5738-000CN	Holder - Cable holder - Secures cable at left front side near DC controller board - White plastic stand-off/holder
RU5-0791-000CN	Gear - 34-tooth gear - Mounts on the fuser motor plate
RU5-2796-000CN	Spring - Tension spring - Provides tension to the paper sensing lever
RU5-2822-000CN	Spring - Tension spring - Provides tension to the scanner assembly
VS1-7177-003CN	Clip - Retaining clip - This is a retaining clip for fuser thermistor power cable
XA9-1504-000CN	Screw - M3 truss head (flanged) screw - 8mm long
XA9-1801-000CN	Screw - M13x12 RS screw - Used to secure metal to metal
XB1-2300-407CN	Screw - M3x4 machined truss-head screw
XD9-0240-000CN	Pin - Pin, dowel
RL1-1216-000CN	Plate - Fuser motor (M11) plate
RS5-9099-000CN	Screw - Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used)
FS6-0814-000CN	Gear - 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley
RC1-9620-000CN	Pulley - Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assembly
RC1-4585-000CN	Bushing - Bushing - Located on the side cover assembly (four needed)
RC1-8567-000CN	Roller - Multi-purpose paper pick-up roller
Q7829-67924	Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white)
Q3938-67970	Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF
Q6998-67901	Door - Front door assembly - For the stapler/stacker unit
Q6998-67902	Tray - Top output bin tray - Stack sub-tray assembly for the stapler/stacker unit
Q6999-67901	Door - Front door assembly - For the booklet maker unit
Q7542-60003	PC_Board - Formatter (main logic) board - For HP Color Laserjet CM6040 series
Q3938-60107	Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)
Q3938-67953	Diverter - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly
Q3938-67954	Cover - Roller cover - Plastic cover that protects the ADF pick-up roller
RM1-4113-000CN	Tray - Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242)
Q3931-67906	Filter - Air filter kit
Q3938-67945	Cover - ADF rear end cover assembly - End cover (cap)
Q3938-67946	Cover - ADF front end cover assembly - End cover (cap)
Q3938-67948	Cable - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly
Q3938-67949	Pad - ADF separation pad assembly - Helps separate paper in the ADF
Q3938-67950	Tray - ADF input paper tray assembly - Holds 50-sheets
Q3938-67951	Flag - ADF paper sensor flag
Q3938-67905	Inverter - Inverter assembly
Q3938-67906	Glass - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel
Q3938-67907	Sensor - Scanner lid sensor assembly
Q3938-67908	Motor - Scanner motor - Drives the optical carriage assembly
Q3938-67909	Pulley - Scanner pulley assembly - For transmission timing belt
Q3938-67911	Rod - Scanner rod - Shaft that the scanner carriage assembly rides on
Q3938-67915	Guide - Rubber guide - For the scanner glass
Q3938-67920	Cover - Upper cover - Plastic cover that protects the upper left side of the ADF unit
Q3938-67921	Cover - ADF lower cover - Plastic cover that protects the lower left part of the ADF unit
Q3938-67922	Cover - Upper cover - Plastic cover that protects the upper right side of the ADF unit
Q3938-67923	Cover - ADF lower cover - Plastic cover that protects the lower right part of the ADF unit
Q3938-67924	Cover - ADF top cover - Plastic cover that protects the top part of the ADF unit
Q3938-67925	Cover - ADF rear cover - Plastic cover that protects the rear part of the ADF unit
Q3938-67926	Cover - Front cover - Plastic L-shaped cover were control panel snaps on
Q3938-67927	Cover - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover
Q3938-67928	Hardware - Power supply harness
Q3938-67935	Belt - Transmission timing belt - Maintain constant speed during power transmission - Located on the trasmission assembly
Q3938-67937	Fan - Cooling fan - Fan that cools the scanner controller board (SCB) area