Part Description
Q7719-67951 Flash_Card  - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
IR4044K257NI Scanner  - Scanner assembly - For the HP 9250c Digital Sender series
IR4044P524NI Fan  - Tubaxial fan assembly - Snap-locks in the fan holder on the scanner base assembly
Q7715-67951 Flash_Card  - 64MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
IR4041K121NI Optical_Unit  - Scanner optical carriage assembly - Includes the optical scanner and light mounted on a carriage assembly - Passes under the document during the flatbed scanning operation - Mounts inside the flatbed scanner assembly
IR4041K121NR Optical_Unit  - Scanner optical carriage assembly - Includes the optical scanner and light mounted on a carriage assembly - Passes under the document during the flatbed scanning operation - Mounts inside the flatbed scanner assembly
PF2284-SVPNR ADF  - ADF assembly - For Digital Sender 9200C - Includes ADF right cover corner, ADF right cover, ADF rear cover, white scan background, white mylar backing, 2 white mylar backing springs, screw 3x10, screw 4x10, upper hinge cover, various screws, and ADF cable
IR4044P525NR Power_Supply  - Power supply assembly - Does NOT include the power switch actuator - Mounts in the scanner base assembly towards the front
5851-3833 Hard_Drive  - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935. 
IR4044K275NR Scanner  - Scanner control board (SCB) - Provides timing and control for the scanner 
Q7718-67951 Memory  - 128MB, 100-pin, DDR SDRAM DIMM memory module
Q5997-67901 Maintenance_Kit  - ADF maintenance kit - Includes the ADF paper pickup roller assembly, separation pad assembly, and three clear mylar replacement strips.
Q7713-67951 Flash_Card  - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns
PF2288K050NI Mylar  - Three ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly
PF2282K039NI Roller  - ADF paper pickup roller assembly - Includes the pickup roller, separation roller, and drive gear mounted in a frame - Mounts on the bottom of the ADF cover assembly (above the input paper tray)
PF2284K042NI Tray  - ADF document input tray - Includes the tray body with width adjustment side wings and pull-out extender
IR4044K107NI Actuator  - Power switch actuator assembly - 'L' shaped structure with mechanical linkage and power button - Linkage actuates the power switch on the power supply assembly
PF2284K015NI Cover  - Control panel support cover assembly (Does NOT include the control panel) - Includes the base structure, control panel support piece, and cable assembly - Mounts to the top of the ADF assembly
PF2284P044NI Cover  - Right cover for the ADF assembly - Larger of the two plastic side covers
PF2284P086NI Cover  - Rear cover for the ADF assembly - Rectangular cover with cutouts for the bottom base and the two hinge assemblies - Mounts on the rear of the ADF assembly
PF2284K012NI Cover  - ADF left cover assembly - Includes the left cover, ADF cover release button assembly, and left corner cover
PF2282K035NI Pad  - ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly (At the rear of the paper input tray)
PF2282P339NI Plate  - ADF white plastic scanner background plate - Used as a white background during flatbed document scanning - Mounts on the underside of the ADF assembly (above the scanner assembly)
PF2282K043NI Mylar  - Mylar holder assembly - This is the cover (holder) that holds the Clear mylar sheet in place - Mounts on the bottom of the ADF assembly
IR4044P326NI Cover  - Right Hinge cover - 'U' shaped cover for the left hinge - Mounts on the rear of the scanner base assembly over the right hinge guide assembly
PF2282P025NI Plate  - White backing plate assembly - Used as a white background for scanning documents when passing through the ADF assembly - Mounts on the underside of the ADF assembly towards the rear
IR4044P351NI Cover  - Front scanner cover
PF2284K500NI Cable  - ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly
PF2284P060NI Cover  - Output bin extender cover - Keeps the output bin extender from sliding all the way out - Mounts to the bottom of the ADF base assembly
IR4044P312NI Cover  - Left cover assembly - For the flatbed scanner assembly
IR4044P325NI Cover  - Left Hinge cover - 'U' shaped cover for the left hinge - Mounts on the rear of the scanner base assembly over the left hinge guide assembly
IR4044K560NI Cable  - Ribbon cable assembly - Includes the ribbon cable with formatter bulkhead connector - Interconnects the formatter board to the scanner control board
PF2284P080NI Cover  - Left rear corner cover for the ADF assembly - Small plastic cover next to the support structure for the control panel
IR4044P313NI Cover  - Right cover assembly - For the flatbed scanner assembly
IR4044K538NI Cable  - Scanner Control Board (SCB) cable assembly - Connects from the scanner control board to the rear wall of the scanner base assembly (Connectors for the ADF assembly cable)
PF2284P079NI Cover  - Right rear corner cover for the ADF assembly - Small plastic cover next to the support structure for the control panel
IR4044P314NI Cover  - Rear cover - Rectangular cover with two notches for the ADF and control panel cables - Mounts on the rear of the scanner base assembly (Between the left and right hinge covers)
PF2284P061NI Extender  - Output tray extender and paper stop - Extends to accommodate legal size documents and acts as a paper stop - Slides out from the base of the ADF assembly
PF2282K034NI Frame  - ADF separation pad frame assembly - Includes the full width support structure and the ADF separartion pad assembly - Mounts in the top of the ADF assembly at the back of the input tray
PF2284P072NI Cover  - Control panel upper cover - Has cutouts for the display, function and dial keys
PF2284P088NI Cover  - Upper hinge cover for the ADF assembly - Snap-locks on to the top of each hinge on the rear of the ADF assembly (Two used)
IR4044P337NI Support  - Scanner support - Plastic column on a base - Mounts inside the bottom cover (towards the right side) and provides support for the flatbed scanner assembly (Two used)
PF2284P073NI Cover  - Control panel lower cover - 'C' shaped cover which helps retain the control panel in the upper cover
PF2282K040NI Cover  - Pickup roller cover - 'C' shaped plastic cover that surrounds the paper pickup roller assembly - Mounts on the bottom of the ADF cover assembly
IR4044K535NI Cable  - Internal power cable assembly - Includes the cable and power cord receptacle - Receptacle mounts on the rear of the scanner base assembly and the cable connects to the power supply assembly
IR4044K537NI Cable  - Control panel cable assembly - Interconnects the control panel to the intermediate board
PF2284P089NI Lever  - Output bin paper lever - Small plastic flap with hinge pins - Mounts to the bottom of the ADF base assembly and sticks up into the output tray
8121-0740 Power_Cord  - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan)
040100FNBBNI Screw  - M4 pan-head phillips screw with machine threads - 10mm long
PF2284P376NI Spring  - Compression spring - Provides downward pressure in the right ADF damper assembly - Mounts inside the right protruding pin on the bottom of the ADF assembly
PF2284P091NI Cover  - Damper base cover - Cross-shaped plastic piece - Holds the left and right ADF assembly damper springs in place (Two used)
PF2284P375NI Spring  - Compression spring - Provides downward pressure in the left ADF damper assembly - Mounts inside the left protruding pin on the bottom of the ADF assembly
PF2284P090NI Pin  - Damper pin spring cover - Cylindrical spring-loaded pins that protrude through the bottom of the ADF assembly and contact the scanner assembly top (Two used - Order springs separately)
PF2284K151NI Latch  - ADF jam release latch - Full-width shaft with hook arms on each end - Keeps the control panel / top cover assembly on the ADF assembly closed
030080FWWSNI Screw  - M3 pan-head phillips screw with machine threads and captive washer - 8mm long
IR4041P007NI Filter  - Scanner fan filter - Small rectangular foam filter
PF2282P039NI Gear  - Gear - Pick up gear
PF2282P343NI Spring  - Compression spring - Holds the white mylar backing plate firmly against the document passing through the ADF assembly (Two used)
5851-2501 Cable  - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board
5851-2502 Cable  - Hard drive SATA cable - Connects the hard drive with the mother board - Transfer all the data from the printer to the hard drive
IR4041P021NI Screw  - M3 pan-head phillips screw with plastite threads - 8mm long
030060FWWSNI Screw  - M3 pan-head phillips screw with machine threads and captive washer - 6mm long - Used in the ADF assembly
IR4044P200NI Screw  - Screw - Used to secure the formatter ribbon cable connector to the internal bulkhead
030060FNWSNI Screw  - M3 pan-head phillips screw with machine threads - 6mm long - Used to secure the top cover of the internal cage for the formatter board assembly
CB472A LaserJet  - HP Digital Sender 9250c
NS-SCR00016NI Screw  - M3 pan-head phillips screw with machine threads - 6mm long - Used to mount the hinges to the ADF assembly
CB472-60105 Overlay  - Control panel overlay - For the 9250c Digital Sender (English)
CB472-67905 Control_Panel  - Control panel assembly - For HP 9250c Digital Sender