Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts
- Home
- About us
- Products
- Fuser Assembly
- Fuser Film Sleeve
- Formatter Board
- DC Controller Board
- Power Supply
- Separation Pad
- Pickup Roller
- Bushing Pressure Roller
- Fuser Roller
- Print Laser Scanner
- Printer Server
- Printer Gear Parts
- Printer Head
- Toner Cartridges
- Hp Server Parts
- Copier Parts
- Designjet Parts
- Barcode Scanner
- Label Printer Parts
- Carriage Belt
- Hp Scanner Parts
- HP Tape Drive
- HP Transfer Kits
- HP Computer Parts
- Coding Printer
- Printer Cover Print Input Tray
- Projector spare parts
- 3D Printer
- Drive Gear Parts
- Handheld Mobile PDA
- BarCode Scanner
- Faqs
- News
- Certificate
- Contact us
HP Color LaserJet 1500Lxi Parts
sourcehttp://www.printerparts-hp.com/
publisherJacky
time2013/04/25
Part | Description |
Color_LaserJet - HP Color LaserJet 1500LXI Printer | |
Fuser_Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat | |
Fuser_Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer | |
Laser_Scanner - Laser/scanner assembly | |
Laser_Scanner - Laser/scanner assembly | |
Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages) | |
Fuser_Assembly - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat | |
Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages) | |
PC_Board - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly) | |
Print_Server - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port | |
Power_Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch | |
Cartridge - Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Cartridge - Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Cartridge - Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Power_Supply - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch | |
Carousel - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables | |
Cartridge - Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Sideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) | |
PC_Board - Formatter board only - Does not include the metal formatter cage covers | |
Drive_Assembly - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears | |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Sideplate - Right rear side plate assembly - Includes the rear half of the metal right side plate, the Fuser Assembly drive motor and the three associated gears | |
Sideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side | |
Power_Supply - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer | |
Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage | |
Motor - Main motor assembly - Large motor mounted on a controller PC board | |
Motor - Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly | |
Tray - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender | |
Power_Supply - Sub-high voltage board - Small auxillary PC board | |
Cover - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly | |
Motor - Rotary motor assembly | |
PC_Board - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors | |
Clutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft | |
Fan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA) | |
PC_Board - Density photoelectric sensor PC board | |
Motor - Stepping motor - 24V DC | |
Motor - Stepping motor (24V) | |
Motor - Stepping motor - 24V DC | |
Motor - Stepping motor - 24VDC | |
Cable - Cable assembly (two 3-pin connectors and a spad lug) | |
Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark) | |
Fan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA) | |
Roller - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear | |
Roller - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear | |
Sideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges | |
Solenoid - Solenoid assembly | |
Cover - Left side cover (Quartz Gray) - Does not include any attaching parts | |
Solenoid - Solenoid assembly | |
PC_Board - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors | |
Cable - Cable assembly (two 3-pin connectors and a spad lug) | |
Pressure_Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel | |
Cable - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long | |
Pressure_Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft | |
Power_Supply - Sub-high voltage board - Small auxillary PC board | |
Cover - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board) | |
Guide - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear | |
Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) | |
Roller - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag | |
Roller - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper | |
Cover - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door | |
Tray - Face-up output tray assembly - Includes the pull-down door and Fuser Assembly locking bracket (Does NOT include the lock releases) | |
Clutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft | |
Door - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame | |
Guide - Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller | |
PC_Board - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch | |
Cable - Cable assembly (two 7-pin connectors) | |
Door - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover | |
Shutter - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear | |
Control_Panel - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board | |
Cable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101) | |
Cable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101) | |
Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly | |
Sideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame | |
Pad - Separation pad assembly - Includes the separation pad, holder and spring | |
Guide - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers | |
Guide - Left paper feed guide (small Black plastic arm) | |
PC_Board - Registration sensor PC Board - Small board with flag activated photosensor | |
Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland) | |
Reader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board | |
PC_Board - Density photoelectric sensor PC board | |
Guide - Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1) | |
Bezel - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors | |
Gear - Gear assembly - Metal plate with two White plastic gears attached | |
Bushing - Bushing/shaft retainer assembly - Black plastic | |
Reader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board | |
Reader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board | |
Plate - Cover plate (metal) | |
Plate - Mounting/grounding plate | |
Thermistor - Thermistor for HP Color LaserJet 2500 Series | |
Hinge - Tray hinge - For the right side of the multi-purpose front input tray (tray one) | |
Cable - Cable assembly (two 4-pin connectors) with shield | |
Hinge - Tray hinge - For the left side of the multi-purpose front input tray (tray one) | |
Arm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open | |
Clip - Cable clip - 'C' shaped White plastic | |
Cover - Solenoid cover (Steel) - For magnetic wave sheilding | |
Cable - Flat flexible cable | |
Connector - Connector assembly - For optional paper tray | |
PC_Board - Sensor PC board - Small board with flag activated photosensor | |
Support - Laser/scanner support assembly (sheet metal plate) | |
Belt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it | |
Print_Server - JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector | |
Power_Cord - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) | |
Print_Server - JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable | |
Power_Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) | |
Tray - Face-Up output tray door (ONLY) | |
Tray - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum | |
Thermistor - Thermistor for HP Color LaserJet 2820 Series | |
Reader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board | |
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan) | |
Cover - Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door | |
Airflow_Guide - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side | |
Hinge - Tray hinge - For the left side of the multi-purpose front input tray (Tray 1) | |
Power_Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand) | |
Guide - Right paper feed guide (small Black plastic arm) | |
Cable - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors) | |
Cable - Cable assembly (two 8-pin connectors, Purple wire) | |
Solenoid - Solenoid assembly | |
Holder - Holder - Housing for the fusing connector assembly | |
Cable - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector | |
Cable - Cable assembly (with seven connectors) | |
Roller - Paper pickup roller ('D' shaped) | |
Guide - Left cartridge guide assembly | |
Hinge - Tray hinge - For the right side of the multi-purpose front input tray (Tray 1) | |
Gear - Gear assembly - Metal plate with two White plastic gears attached | |
Connector - Connector assembly - For optional bottom paper tray | |
Sensor - Sensor PC board - Small board with flag activated photosensor | |
Switch - Microswitch with lever activator | |
PC_Board - Registration sensor PC Board - Small board with flag activated photosensor | |
Cover - Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo | |
Cable - Cable assembly (two 2-pin connectors) | |
Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea) | |
Airflow_Guide - Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic) | |
Cover - Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer | |
Damper - Damper assembly (Gray plastic piece with small 13-tooth gear on it) | |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills | |
Connector - Connector for the Fuser Assembly - Seven small contol pins plus three separated high current pins | |
Shaft - Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever | |
Cover - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly | |
Cover - Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray | |
PC_Board - Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly | |
Cable - Front cable assembly (six connectors) | |
Bushing - Support bushing | |
Plate - Transfer slide plate - Small 'U' shaped metal insert plates | |
Rack_Slide - Rack slide - White plastic piece with gear teeth layed out in rack form on both sides | |
Arm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open | |
Belt - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it | |
Spring - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer | |
Insulator - Insulating sheet (Transparent plastic) | |
Plate - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through | |
Cable - High voltage cable assembly | |
Rod - Power switch rod - Goes between the power button and the power switch on the low voltage power supply board | |
Pulley - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley | |
Cable - Cable assembly (two 5-pin connectors) | |
Bushing - Shaft bushing for HP Color LaserJet 1500 Series | |
Clip - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other | |
Bushing - Bushing/shaft retainer assembly (White plastic) | |
Guide - Cable guide (Quartz Gray plastic) | |
Shaft - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley | |
Spring - Electrical contact spring | |
Spring - Electrical contact spring | |
Cable - Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board | |
Cable - Cable assembly (two connectors and two spade lugs) | |
Gear - 30 tooth gear (White plastic) | |
Gear - 26 tooth gear (White plastic) - Has recess for shaft drive pin | |
Roller - Sensor flag roller (small White plastic roller) | |
Spring - Electrical contact spring | |
Spring - Electrical contact spring | |
Pulley - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys | |
Flag - Test print flag (Black lever) | |
Spring - Torsion spring for HP Color LaserJet 1500 Series | |
Cable - Cable assembly for HP Color LaserJet 1500 Series | |
Gear - 51 tooth gear (White plastic) | |
Clip - E-ring clip for HP Color LaserJet 1500 Series | |
Cable - Cable assembly (two 3-pin connectors) | |
Gear - Dual gear - 20 tooth / 40 tooth | |
Spring - Electrical contact spring - Spring steel wire with compression springs formed on both ends | |
Lever - Right side lock release lever | |
Plate - Contact plate for HP Color LaserJet 2500 Seriess | |
Support - PC board support (Black plastic holder) | |
Spring - Electrical contact spring | |
Bushing - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1) | |
Flag - Sensor arm and flag - Activates the photosensor (Does NOT include the roller) | |
Spring - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag | |
Cover - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly | |
Cable - Cable assembly (two 3-pin connectors) | |
Gear - Dual gear - 26 tooth / 50 tooth (White plastic) | |
Holder - Sensor assembly mounting holder | |
Insulator - Insulating sheet (Transparent plastic) | |
Bushing - Bushing assembly (black plastic bushing with small guide roller on top) | |
Spring - Compression spring | |
Holder - Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switch | |
Bushing - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1) | |
Cover - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly | |
Spring - Tension spring for HP Color LaserJet 1500 Series | |
Spring - Compression spring | |
Gear - 30 tooth gear (White plastic) | |
Cable - Cable assembly (8-pin, red wire) | |
Plate - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor | |
Spring - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer | |
Lever - Left side lock release lever | |
Flag - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other | |
Bushing - Bushing (black plastic) | |
Ground - Grounding plate | |
Spring - Torsion spring for HP Color LaserJet 2500 Series | |
Gear - 15 tooth gear with drive shaft (Black plastic) | |
Gear - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth | |
Bushing - Bushing for HP Color LaserJet 1500 Series | |
Roller - Pressure roller (small Black hard plastic 'solid' roller) | |
Shield - RFI shield - Parallel wire form mounted over the fan | |
Cable - Grounding cable assembly | |
Gear - Dual gear - 37 tooth / 43 tooth (White plastic) | |
Ground - Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards | |
Pad - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded) | |
Roller - Pressure roller (small Black hard plastic disk shaped roller) | |
Static_Dissipater - Static eliminator ground plate - Right angled metal piece with small teeth on top edge | |
Roller - Belt roller - Small oval shaped roller approximately 1-3/4 inches long | |
Spring - Electrical contact spring | |
Spring - Electrical contact spring | |
Shaft - Idler gear shaft - Short metal rod | |
Gear - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab | |
Spring - Tension spring for HP Color LaserJet 1500 Series | |
Foot - Rubber foot - Square self-adhesive rubber foot | |
Guide - Top output bin guide - Small curved ribbed black plastic piece | |
Cover - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft | |
Plate - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor | |
Cable - Cable assembly (four 3-pin connectors) | |
Gear - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away | |
Gear - Dual gear - 32 tooth / 37 tooth (White plastic) | |
Screw - Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips | |
Service_Guide_PH - HP Color LaserJet 1500L Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. | |
NamePlate - Nameplate - Color LaserJet 1500L printer logo | |
Paper - Gd: lj paper spec | |
Power_Cord - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) | |
Paper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides | |
Paper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box |