News - HP Color LaserJet 2500L Parts

year

Search This Supplers Products:HP Printer PartsFuser Film SleeveFuser AssemblyPrinter Gear PartsCopier PartsCopier Repair Parts

home categories store home newsPromotion of the products

HP Color LaserJet 2500L Parts

sourcehttp://www.printerparts-hp.com/

publisherJacky

time2013/05/01

Part	Description
C7846A	Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package
C9705A	Color_LaserJet - HP Color LaserJet 2500L Printer
C9145-69001	PC_Board - Formatter board assembly - Includes the formatter board and all the metal cage covers
J3110A	Print_Server - Ethernet 10Base-T (RJ-45) EIO network internal print server PC board
J6058A	Print_Server - JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot
J7934A	Print_Server - JetDirect 620N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934G	Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
C9145-67901	PC_Board - Formatter board assembly - Includes the formatter board and all the metal cage covers
C9699A	Tray - Optional 500 sheet paper input tray - Includes tray base which attaches to tray 2, and the slide out paper tray - Accommodates 216mm x 279mm (8.5 x 11 inches) or 210mm x 279mm (8.3 x 11.7 inches) media - Optional 250 sheet tray must be installed first
RG5-6913-000CN	Fuser_Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
J4135A	Print_Server - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers
RM1-3525-000CN	Fuser_Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer
RG5-6880-000CN	Laser_Scanner - Laser/scanner assembly
RG5-6890-030CN	Laser_Scanner - Laser/scanner assembly
C9704-67901	Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
RG5-6903-000CN	Fuser_Assembly - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat
RH3-2252-000CN	Power_Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
C9698A	Tray - Optional 250 sheet paper input tray - Includes tray base which attaches to printer, and the slide out paper tray - Accommodates 148mm x 210mm (5.8 x 8.3 inches) to 216mm x 356mm (8.5 x 14 inches) media - Only one 250 sheet tray supported per printer
C9704A	Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (Typical combined life is approximately 6,000 to 8,000 pages)
C9705-69003	PC_Board - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
RH3-2241-000CN	Power_Supply - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
C9121A	Memory - 128MB, 100-pin SDRAM DIMM memory module
Q7709AX	Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM
J6057A	Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector
C9703-67901	Cartridge - Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage
C9701-67901	Cartridge - Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage
C9702-67901	Cartridge - Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage
RH3-2243-000CN	Power_Supply - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch
RG5-6910-080CN	Carousel - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables
RG5-6959-060CN	PC_Board - DC controller board
Q7708AX	Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package
Q7707AX	Memory - 32MB, 100-pin SDRAM DIMM memory module
C7845A	Memory - 32MB, 100-pin SDRAM DIMM memory module
C9700-67901	Cartridge - Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage
J3111A	Print_Server - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA
RG5-6932-060CN	Sideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701)
RG5-6911-000CN	Drive_Assembly - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears
C9703A	Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 5,000 pages at 5% coverage
C9701A	Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 5,000 pages at 5% coverage
C9702A	Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 5,000 pages at 5% coverage
RG5-6934-000CN	Sideplate - Right rear side plate assembly - Includes the rear half of the metal right side plate, the Fuser Assembly drive motor and the three associated gears
RG5-6932-070CN	Sideplate - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side
RG5-6960-000CN	Power_Supply - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer
J4167A	Print_Server - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
C9700A	Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages at 5% coverage
RF5-4010-000CN	Motor - Main motor assembly - Large motor mounted on a controller PC board
RF5-4010-020CN	Motor - Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly
RG5-6937-000CN	Tray - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
RG5-7124-000CN	Power_Supply - Sub-high voltage board - Small auxillary PC board
RG5-6958-000CN	Motor - Rotary motor assembly
RG5-6900-000CN	Cover - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
RG5-6964-000CN	PC_Board - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors
RH7-5389-000CN	Clutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
RH7-1537-000CN	Fan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
RH7-7158-000CN	PC_Board - Density photoelectric sensor PC board
RH7-1629-000CN	Motor - Stepping motor - 24V DC
RH7-1535-000CN	Motor - Stepping motor (24V)
RH7-1533-000CN	Motor - Stepping motor - 24V DC
RH7-1625-000CN	Motor - Stepping motor - 24VDC
RG5-6971-000CN	Cable - Cable assembly (two 3-pin connectors and a spad lug)
RG5-6939-000CN	Registration - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
8120-6814	Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Denmark)
RH7-1630-000CN	Fan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
RG5-6897-020CN	Roller - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
RG5-6936-000CN	Roller - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
RG5-6942-000CN	Sideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges
RB3-0028-000CN	Cover - Left side cover (Quartz Gray) - Does not include any attaching parts
RH7-5384-000CN	Solenoid - Solenoid assembly
RH7-5340-000CN	Solenoid - Solenoid assembly
RG5-7609-000CN	PC_Board - Carousel position and toner level photoelectric sensor PC board - 'L' Shaped PC board with the two sensors
RG5-7161-000CN	Cable - Cable assembly (two 3-pin connectors and a spad lug)
RG5-6943-000CN	Pressure_Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft
RG5-6943-020CN	Pressure_Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel
C6518A	Cable - Universal serial bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
RG5-7616-000CN	Power_Supply - Sub-high voltage board - Small auxillary PC board
C2950A	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RG5-6902-000CN	Cover - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
RG5-6930-000CN	Guide - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear
RG5-6952-000CN	Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
RG5-6939-020CN	Roller - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
RF5-4040-020CN	Roller - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper
RG5-6953-000CN	Cover - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
RG5-6931-000CN	Tray - Face-up output tray assembly - Includes the pull-down door and Fuser Assembly locking bracket (Does NOT include the lock releases)
RH7-5366-000CN	Clutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
RF5-4007-000CN	Door - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame
RF5-4049-000CN	Guide - Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller
RG5-7612-000CN	PC_Board - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
RG5-7109-000CN	Cable - Cable assembly (two 7-pin connectors)
RB3-0033-000CN	Door - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
RG5-6940-050CN	Shutter - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
RG5-6927-000CN	Control_Panel - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board
Q3948-60144	Cable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
RH2-5524-000CN	Cable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
RG5-6952-020CN	Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
5063-1256	Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
RG5-6942-030CN	Sideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame
RF5-4012-000CN	Pad - Separation pad assembly - Includes the separation pad, holder and spring
RG5-6929-000CN	Guide - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers
RB2-9954-000CN	Guide - Left paper feed guide (small Black plastic arm)
RG5-6967-000CN	PC_Board - Registration sensor PC Board - Small board with flag activated photosensor
8120-6815	Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland)
RG5-7131-000CN	Reader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
RH7-7146-000CN	PC_Board - Density photoelectric sensor PC board
RG5-6951-000CN	Guide - Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1)
RB3-0035-000CN	Bezel - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors
RG5-6956-000CN	Reader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
RG5-6957-000CN	Reader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
C9706-60104	Cable - Flat flexible cable
RG5-7114-000CN	Cable - Cable assembly (two 4-pin connectors) with shield
RB2-3041-000CN	Hinge - Tray hinge - For the left side of the multi-purpose front input tray (tray one)
RB3-0120-000CN	Cover - Solenoid cover (Steel) - For magnetic wave sheilding
RH7-7149-000CN	Thermistor - Thermistor for HP Color LaserJet 2500 Series
RB3-0089-000CN	Arm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
WG8-5382-000CN	PC_Board - Sensor PC board - Small board with flag activated photosensor
RB2-9808-000CN	Bushing - Bushing/shaft retainer assembly - Black plastic
WT2-5056-000CN	Clip - Cable clip - 'C' shaped White plastic
RB2-9916-000CN	Plate - Mounting/grounding plate
RB2-3042-000CN	Hinge - Tray hinge - For the right side of the multi-purpose front input tray (tray one)
RH2-5519-000CN	Connector - Connector assembly - For optional paper tray
RG5-6938-000CN	Gear - Gear assembly - Metal plate with two White plastic gears attached
RG5-6907-030CN	Support - Laser/scanner support assembly (sheet metal plate)
RB1-8668-030CN	Belt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
8120-6813	Power_Cord - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
8120-6809	Power_Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
C2951A	Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
RB3-0176-000CN	Tray - Face-Up output tray door (ONLY)
RB3-0019-000CN	Tray - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
RH7-7159-000CN	Thermistor - Thermistor for HP Color LaserJet 2820 Series
RG5-7132-000CN	Reader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
8120-6812	Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
RB3-0030-000CN	Cover - Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
RB2-9904-000CN	Airflow_Guide - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side
RB2-6405-000CN	Hinge - Tray hinge - For the left side of the multi-purpose front input tray (Tray 1)
8120-6810	Power_Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)
RB2-9955-000CN	Guide - Right paper feed guide (small Black plastic arm)
RG5-7108-000CN	Cable - Cable assembly (two 8-pin connectors, Purple wire)
RG5-7146-000CN	Cable - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors)
RH7-5337-000CN	Solenoid - Solenoid assembly
RB3-0006-000CN	Holder - Holder - Housing for the fusing connector assembly
RG5-7122-000CN	Cable - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
RG5-7144-000CN	Cable - Cable assembly (with seven connectors)
RB3-0160-000CN	Roller - Paper pickup roller ('D' shaped)
RG5-6935-020CN	Guide - Left cartridge guide assembly
RB2-6406-000CN	Hinge - Tray hinge - For the right side of the multi-purpose front input tray (Tray 1)
RG5-6938-030CN	Gear - Gear assembly - Metal plate with two White plastic gears attached
WS1-6336-000CN	Connector - Connector assembly - For optional bottom paper tray
WG8-5593-000CN	Sensor - Sensor PC board - Small board with flag activated photosensor
RH7-6051-000CN	Switch - Microswitch with lever activator
RG5-7613-000CN	PC_Board - Registration sensor PC Board - Small board with flag activated photosensor
RB3-0103-000CN	Cover - Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo
RG5-7106-000CN	Cable - Cable assembly (two 2-pin connectors)
8120-6811	Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
RB3-0025-000CN	Airflow_Guide - Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic)
RB3-0032-000CN	Cover - Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
5090-3379	Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
RB2-6248-000CN	Damper - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
RH2-5520-000CN	Connector - Connector for the Fuser Assembly - Seven small contol pins plus three separated high current pins
RB3-0104-000CN	Cover - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
RB2-4933-000CN	Shaft - Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever
RB3-0102-000CN	Cover - Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray
RG5-6965-000CN	PC_Board - Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly
RG5-7145-000CN	Cable - Front cable assembly (six connectors)
RB2-2973-000CN	Bushing - Support bushing
RB3-0057-000CN	Plate - Transfer slide plate - Small 'U' shaped metal insert plates
RB3-0090-000CN	Rack_Slide - Rack slide - White plastic piece with gear teeth layed out in rack form on both sides
RB3-0089-030CN	Arm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
RB3-0063-000CN	Belt - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
RB3-0121-000CN	Spring - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
RB3-0056-000CN	Insulator - Insulating sheet (Transparent plastic)
RB3-0010-030CN	Plate - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
RG5-7130-000CN	Cable - High voltage cable assembly
RB3-0067-000CN	Pulley - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
RB3-0037-000CN	Rod - Power switch rod - Goes between the power button and the power switch on the low voltage power supply board
RB3-0014-000CN	Bushing - Bushing assembly (black plastic bushing with small guide roller on top)
RB3-0015-000CN	Spring - Compression spring
RB2-7195-000CN	Roller - Sensor flag roller (small White plastic roller)
RB2-9912-000CN	Guide - Top output bin guide - Small curved ribbed black plastic piece
RG5-7128-000CN	Cable - Cable assembly (four 3-pin connectors)
WT2-5737-000CN	Clip - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other
XD2-1100-502CN	Clip - E-ring clip for HP Color LaserJet 1500 Series
RB3-0120-020CN	Cover - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
RB3-0135-000CN	Flag - Test print flag (Black lever)
RS7-0436-000CN	Gear - Dual gear - 37 tooth / 43 tooth (White plastic)
RG5-7123-000CN	Cable - Grounding cable assembly
RB3-0122-000CN	Spring - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
RB2-9916-020CN	Cover - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
RB2-9952-000CN	Spring - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
RB2-3044-000CN	Bushing - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
RB2-3043-000CN	Bushing - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
RB3-0066-000CN	Plate - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
RB3-0179-000CN	Lever - Left side lock release lever
RF5-4047-000CN	Pad - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
RS7-0426-000CN	Gear - Dual gear - 26 tooth / 50 tooth (White plastic)
RB3-0062-000CN	Support - PC board support (Black plastic holder)
RB3-0111-000CN	Flag - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
RB2-9942-000CN	Ground - Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards
RB3-0012-000CN	Roller - Belt roller - Small oval shaped roller approximately 1-3/4 inches long
RG5-6974-000CN	Cable - Cable assembly for HP Color LaserJet 1500 Series
RG5-7126-000CN	Cable - Cable assembly (two 5-pin connectors)
RB2-9903-000CN	Guide - Cable guide (Quartz Gray plastic)
RB3-0178-000CN	Lever - Right side lock release lever
RG5-7129-000CN	Cable - Cable assembly (two connectors and two spade lugs)
RS5-1637-000CN	Bushing - Bushing (black plastic)
RB2-9925-000CN	Flag - Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
RS7-0435-000CN	Gear - Dual gear - 32 tooth / 37 tooth (White plastic)
RB3-0009-000CN	Static_Dissipater - Static eliminator ground plate - Right angled metal piece with small teeth on top edge
RB3-0043-000CN	Spring - Electrical contact spring
RB3-0048-000CN	Spring - Electrical contact spring
RB2-9908-000CN	Roller - Pressure roller (small Black hard plastic disk shaped roller)
RB3-0042-000CN	Spring - Electrical contact spring
RB3-0046-000CN	Spring - Electrical contact spring
RB3-0061-000CN	Pulley - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
RB2-9905-000CN	Spring - Torsion spring for HP Color LaserJet 2500 Series
RB2-9924-000CN	Holder - Sensor assembly mounting holder
RG5-7115-000CN	Cable - Cable assembly (two 3-pin connectors)
RB2-6297-000CN	Foot - Rubber foot - Square self-adhesive rubber foot
RB3-0011-000CN	Shaft - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
RB3-0016-000CN	Spring - Electrical contact spring - Spring steel wire with compression springs formed on both ends
RB3-0023-000CN	Holder - Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switch
RB3-0065-000CN	Plate - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
RB3-0286-000CN	Plate - Contact plate for HP Color LaserJet 2500 Seriess
RB3-0119-000CN	Ground - Grounding plate
RB2-9809-000CN	Bushing - Bushing/shaft retainer assembly (White plastic)
RB2-9906-000CN	Spring - Torsion spring for HP Color LaserJet 1500 Series
RG5-7117-000CN	Cable - Cable assembly (two 3-pin connectors)
RB3-0022-000CN	Gear - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
RB3-0045-000CN	Spring - Electrical contact spring
RG5-7107-000CN	Cable - Cable assembly (8-pin, red wire)
RS5-1635-000CN	Bushing - Shaft bushing for HP Color LaserJet 1500 Series
RB3-0091-000CN	Gear - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
RB2-9932-000CN	Shield - RFI shield - Parallel wire form mounted over the fan
RB2-9909-000CN	Roller - Pressure roller (small Black hard plastic 'solid' roller)
RB3-0007-000CN	Insulator - Insulating sheet (Transparent plastic)
RB3-0044-000CN	Spring - Electrical contact spring
RB3-0052-000CN	Cover - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
RB3-0092-000CN	Gear - 15 tooth gear with drive shaft (Black plastic)
RS7-0418-000CN	Gear - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
RG5-7114-020CN	Cable - Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board
RS6-2759-000CN	Spring - Compression spring
RS6-2766-000CN	Spring - Tension spring for HP Color LaserJet 1500 Series
RS7-0425-000CN	Gear - 30 tooth gear (White plastic)
RS7-0428-000CN	Gear - 30 tooth gear (White plastic)
RS7-0429-000CN	Gear - 26 tooth gear (White plastic) - Has recess for shaft drive pin
RB3-0060-020CN	Shaft - Idler gear shaft - Short metal rod
RS7-0424-000CN	Gear - Dual gear - 20 tooth / 40 tooth
RS7-0437-000CN	Gear - 51 tooth gear (White plastic)
RB3-0047-000CN	Spring - Electrical contact spring
RS5-1638-000CN	Bushing - Bushing for HP Color LaserJet 1500 Series
RS6-2030-000CN	Spring - Tension spring for HP Color LaserJet 1500 Series
8120-6800	Power_Cord - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
Q1298A	Paper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Q1298B	Paper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
5851-1468	Paper - Gd: lj paper spec
C9705A-Manual	Service_Guide_PH - HP Color LaserJet 2500L Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.